Showing 2053–2064 of 2404 results
SPG30E-60K DC Geared Motor with Encoder 75 RPM 30N.cm 12V
Original price was: ₹2,162.94.₹2,065.00Current price is: ₹2,065.00. (Incl. GST)
SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
Original price was: ₹371.70.₹317.42Current price is: ₹317.42. (Incl. GST)Lead Pitch: 2.54 mm, Row of pitch: 3.81 mm, Clip for SOIC 8 / SOP8, supports a wide range of EEPROMS – 150 / 209 – 24 / 25 Cxx – 93 / 25 Cxx – 95 / 25 Lxx
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
Original price was: ₹507.40.₹430.70Current price is: ₹430.70. (Incl. GST)- W5500 is the type of chip.
- allows for both 3.3V and 5V.
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE are among the hardwired TCP/IP protocols.
- Integrated Ethernet PHY for 10BaseT/100BaseTX.
- Full duplex/half duplex mode automated response support is provided.
- 32 KB of internal memory is used for the Tx/Rx buffers.
Square 2M Float Switch For Industry Pump Tank Sensor
Original price was: ₹588.82.₹348.10Current price is: ₹348.10. (Incl. GST)- Rated voltage/current: 10(4A) 380V ~ 10(8A) 250V
- IP68 is the protection class.
- Operating pressure: 0.1 MPa
- Temperature of operation: 0~75°C
- Electric life: 1 x 100 000 times
- Mechanical life: 5 x 100 000 times
ST-LINK V2
Original price was: ₹501.50.₹413.00Current price is: ₹413.00. (Incl. GST)- This ST Link programmer is equipped with a 500MA internal resettable fuse
- It has a red and blue LED indicator that allows users to observe the working condition of the ST Link V2 Programmer.
ST3232EBTR
Original price was: ₹147.50.₹106.20Current price is: ₹106.20. (Incl. GST)Part Number: ST3232EBTR
Make: STMicroelectronics
2/2 Transceiver Full RS232 16-TSSOP
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
Original price was: ₹519.20.₹430.70Current price is: ₹430.70. (Incl. GST)- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
Standard 24V 2.5A 60W Power Supply with 5.5mm DC Plug
Original price was: ₹814.20.₹684.40Current price is: ₹684.40. (Incl. GST)- Voltage input: 100–260 VAC, 50 Hz
- 24 V 2.5 A output
- Indian three-pin plug type
- Size of the Adapter Output Plug: 5.5mm
- Total Length including Cable: 2.75 metres
Standard 5V 3A Power Supply with Micro USB Plug
Original price was: ₹377.60.₹284.38Current price is: ₹284.38. (Incl. GST)- Voltage (V) of input: 100–280 VAC at 50–60 Hz.
- Current input (mA): 100.
- Power Output: 5V/3A.
- Regulation of load (%): ±5.
- Plug type for input: EU 2-pin.
- Micro USB plug is the output plug.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Standard 60 Watt Corded Glue Gun with 5 Glue Sticks
Original price was: ₹494.42.₹396.48Current price is: ₹396.48. (Incl. GST)- Comes with an On/Off Switch
- Feed Type Trigger-fed Gun
- Rated Power: 60 W
- Heating Up Time: 5 min
- Cord Length: 1 Mtr.
- Aluminum Tip
- Replaceable Cartridge(Glue Sticks)
- Specific Uses of the Product Wood, Plastics, Textiles, Cardboard, Ceramics, Leather, etc
Standard Temperature 40 Watt Hot Melt Glue Gun with On/Off Switch
Original price was: ₹365.80.₹273.76Current price is: ₹273.76. (Incl. GST)- Voltage: 110-220V
- Power consumption: 40W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 40 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
Standard Temperature 60Watt Hot Melt Glue Gun with On/Off Switch
Original price was: ₹395.30.₹284.38Current price is: ₹284.38. (Incl. GST)- Voltage: 110-220V
- Power consumption: 60W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 60 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
