Showing 2065–2076 of 2373 results
T Motors MN601-S KV320+Alpha 60A LV (Motor+ESC Combo)
Original price was: ₹29,028.00.₹27,612.00Current price is: ₹27,612.00. (Incl. GST)Motor KV: 320
Connectivity Length in millimetres: 150
Weight in grams: 246
Peak Current: 50A for 180s
Maximum Power: 1200W (180s)
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
T Motors U12 ll KV 120
Original price was: ₹43,660.00.₹40,922.40Current price is: ₹40,922.40. (Incl. GST)Model: KV120
62% Increase in Payload
Maximum Thrust: 20 kg
1500 flights (40 minutes each) is the motor service life.
novel design for an iron core.
maximum thrust of 20.4 kg.
Easy motor operation in extreme temperatures
T Type GPIO Breakout board with 40 pin Cable and 400pt Breadboard for Raspberry Pi 3
Original price was: ₹413.00.₹312.70Current price is: ₹312.70. (Incl. GST)Compatible With Raspberry Pi Models, Module: T Type GPIO Extension Adapter. This 40 Pin Ribbon Cable is Specially Designed For the Raspberry Pi Model B+, So You Can Easily Connect it to the Low-Level Peripherals.
T-Cobbler with Cable
Original price was: ₹413.00.₹348.10Current price is: ₹348.10. (Incl. GST)- No soldering required
- Compatible with the Raspberry Pi Model A+/B+/Pi 2/Pi 3
- The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk
- Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus
T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
Original price was: ₹270.22.₹186.44Current price is: ₹186.44. (Incl. GST)- Size of inner diameter: 8 mm.
- Brass in colour.
- Composition: Brass.
- 25 grammes in weight.
- Perfect for Lead Screws with an 8mm 4 Start Thread.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
TACT SWITCH KW11-3Z 5A 250V Micro Switch Round Handle 3 Pin N/O N/C for 3D Printers – 2Pcs
Original price was: ₹88.50.₹64.90Current price is: ₹64.90. (Incl. GST)- REFERENCES: JL026 KW11-3Z
- Maximum Current: 5A
- Maximum voltage: 250VAC
- Pin: 3
- Protection Grade: IP40
- Dimensions: 20 x 10 x 7 (LxWxH) mm
- Weight: 2 gm (Each)
Tank Robot Smart Car Chassis
Original price was: ₹5,310.00.₹4,130.00Current price is: ₹4,130.00. (Incl. GST)- Arduino Compatible
- Easy to assemble
- L9110 Connected and Included
- Operating Voltage: 3V – 12V
- Opto Coupler Speed Sensor is Included
- Chassis Kit, Belts, Motors Are Included
- Motor Operating Voltage: 3V – 8V
- Motor Maximum Torque: 1.5kg.cm at 7.2V
- Motor Speed Without Load: 250rpm/m at 7.2V
- Body Size (L x W x H) cm : 19 x 12.5 x 5
Taparia Digital Voltage Tester MDT 81
Original price was: ₹219.48.₹145.14Current price is: ₹145.14. (Incl. GST)- Model: Taparia Digital Voltage Tester MDT 81
- Versatile Voltage Measurement.
- Break Point Locator.
- Current Flow Detection.
- Precise Break Point Location.
- Accurate Voltage Display.
- Continuity Testing on Parallel Lines.
- Phase and Neutral Line Identification.
Tarot TL100D04 Efficient Folding Propeller(CW+CCW)
Original price was: ₹3,481.00.₹2,495.70Current price is: ₹2,495.70. (Incl. GST)1. Compatible with a range of multi-copter motors of the disk type.
2. Increases efficiency by 10%.
3. It is more robust than the original DJI models.
4. Easier to construct and disassemble than the DJI model.
5. Easy to move while safeguarding the propellers.
Tauren Planetary Gear DC motor – 45 RPM / 12V
Original price was: ₹3,774.82.₹3,321.70Current price is: ₹3,321.70. (Incl. GST)- 80 Stall Torque (kg-cm)
- 21 Rated Torque (kg-cm)
- 12 volts is the rated voltage.
- Current rating: 900 mA
- 860 grammes in weight
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Original price was: ₹696.20.₹617.14Current price is: ₹617.14. (Incl. GST)
- Chip Set Driver: TB6560AHQ
- 10 to 35 volts for operation
- Voltage Nominal: 24V
- The 6N137 high-speed OptoCoupler ensures optimal heat dissipation with its huge heat sink, enabling a high speed without any step outs.
TB6600 STEPPER MOTOR DRIVER
Original price was: ₹1,047.84.₹848.42Current price is: ₹848.42. (Incl. GST)- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
