Showing 2173–2184 of 2404 results
Shop
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
- Type of USB connector: USB-Mini Chip Utilised: FT232RL Indicator LEDs with 5v and 3.3v output voltages USB Port
- Up to 1 Mbps of data transfer speed detection done automatically
- Ability to exchange data via an external port using the UART protocol
- Supports Linux, Mac OS X, Windows CE 4.2–5.2, Windows CE 6.0, Windows 8, Windows 7, Windows Vista, Windows XP, and more.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
TTP223 Touch Key Module – 2Pcs
- Voltage range for input: 2 to 5.5 volts DC.
- At VDD=3V, the response time maximum is around 60 mS in rapid mode and 220 mS in low power mode.
- Capacitance (0~50pF) can be used to vary sensitivity.
- Stable human body touch detection to replace conventional direct switch keys.
- offers a pad option for direct mode toggling mode (TOG pin).
- Following a 0.5-second steady period following power-on, the function is disabled and you should not touch the keypad during that time.
- When the key is not touched, the auto calibration and recalibration phase lasts for roughly 4.0 seconds.
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
- Type of Output: NPN-NO
- Red LED evaluates the proximity sensor’s condition.
- A high degree of repeatability in positioning
- Higher frequency of switching
- Broad variety of voltages
- Prevention of water, oil, dust, and vibration
- Short circuit protection, reverse power protection, and direct PLC connection
- Able to swap out limit switches and tiny switches
Turnigy Servo Signal Reverser (Long)
To use the Turnigy Signal Reverser, just plug it in line between the servo and the Y-harness or receiver. It really is that easy. made to function with every kind of servo plug.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Twisted 100cm Servo Lead Extention (Futaba) 22AWG Cable (1pcs/set)
- Servo Lead Extention is the product.
- Length of Cable (cm): 100
- AWG cable size: 22
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Twisted 15CM Servo Lead Extention (JR) 22AWG (1pcs/set)
- Length: 15 cm
- Width: 22 AWG
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Twisted 22AWG Servo Wire Red/Black/White ~ 1Meter
- AWG Cable Size: 22
- Length of cable: One Metre
- Type of Cable: Twisted
- Wire Colours: White, Red, and Black
Twisted 22AWG Servo Wire Red/Black/Yellow (1mtr)
- Product: Servo Wire
- Cable size: 22AWG (each wire)
- Color: Red/Black/Yellow
- Length: 1mtr
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Two Button Remote Control Switch Box -2pcs.
- Homopolymer.
- Excellent Processability.
- Good Resistance to Impact.
- Good rigidity.
- Two switches; black colour
Two Trees – Double Sided PEI (Textured) with Magnetic Base Size 310x310mm
- HotBed for 3D Printer, 310×310 mm
- 850 grammes in weight
- Offering adaptability for projects involving 3D printing
Two Trees – Double Sided PEI Spring Steel Sheet (Textured+PEI) With Magnetic Base Size 235x235mm
- HotBed for 3D Printer, 235×235 mm
- 505 grammes in weight
- Offering adaptability for projects involving 3D printing
Load more products
Loading...