Showing 2209–2220 of 4062 results
Shop
IR Receiving Head VS1838B Remote Control Receiver – 5pcs
- Internal PCM frequency filter.
- strong capacity to prevent meddling from the inside out.
- High resistance against outside light.
- Enhanced protection against disturbances in the electric field
- Low power usage; supply voltage of 3.0V or 5.0V.
- Compatibility with TTL and CMOS.
- Acceptable codes for gearbox are RC5 and NEC codes.
- Receiver with universality. 38 kHz.
- Receiver for an infrared remote control.
IR Remote Control Extension Cord Cable IR Receiver Transmitter Repeater
- Operating power: 5VDC 500mA
- Cable Lenght: 200 cm (2 Meter)
- Cable color: Black
- Weight: 40gm
- Can be used to enhance the range of Device
IR Remote Control without Battery
- Remote control distance: more than 8 meters
- Crystal: the oscillation frequency of 455
- IR carrier frequency: 38KHz
- Output form: Digital
- Power Supply: CR2032 Battery
- Pointing Angle: up to 60º
- Button: free h
IR Remote Control without Battery
- Required Battery: CR2025
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Effective life: 20,000 times
IR2110 High and Low Side Driver IC SMD-16 Package
- IC Name: IR2110
- Package/Case: SMD-16
IR2110S 2.5A high and low-side gate driver IC – 2Pc
- Floating channel designed for bootstrap operation
- Fully operational to +500 V
- Fully operational to +600 V version available (IR2113)
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V logic compatible
- Separate logic supply range from 3.3 V to 20 V
- Logic and power ground + /- 5 V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
IRF3205 MOSFET (Pack Of 3)
- From source voltage to drain 100V is Vds.
- ±20V is the gate to source voltage.
- At 10V, the resistance Rds(on) is 44mohm.
- 130W of power dissipation Pd at 25°C.
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
- 3.3-5 volts is the voltage range.
- Ports: Level Digital.
- Voltage of output load: 0–24 V.
- Output load current: 5A; additional heat sink required at 1A.
- Platform: Raspberry Pi, Arduino, MCU, and ARM.
- The original IRF520 Power MOS can be used to modify the output PWM.
IRF9530 P-Channel Power MOSFET
Features
- Dynamic dV/dt rating
- 100% avalanche rated
- Fast switching
- Ease of paralleling
- New high voltage benchmark
- P-Channel
- Compliant to RoHS directive 2002/95/EC
IRF9540 Power MOSFET
• Dynamic dV/dt rating
• 100% avalanche rated
• Fast switching
• Ease of paralleling
• New high voltage benchmark
• P-Channel
• Advanced process technology
Irfp260N Mosfet Ic Dip-3 Package
- IC Name: IRFP260N
- Package/Case: DIP-3
IRLZ44N Mosfet Ic Dip-3 Package
- IC Name: IRLZ44N
- Package/Case: DIP-3
Load more products
Loading...