Showing 2293–2304 of 2373 results
Shop
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
- Voltage supply: 3.3 V to 5 V
- TSL25911FN is the system.
- Interface for communication: I2C
- Fixed interface address 0x29
- Range of measurement: 0 lx to 88000 lx
- Sensitivity: 188 ulx at maximum
- 600M:1 dynamics
- The gadget works with STM32, Arduino, and Raspberry Pi.
Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector
- Resolutions up to 4K for HDMI Ethernet Channel
- Audio Return Channel
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection
- Baud Rate: FT232RNL 300bps ~ 3Mbps
- Device Port: RS485/422
- Host Port: USB Operating voltage: 5V
Waveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
- Host Interface: USB
- Devise interface: UART
- Communication Range: 50bps ~ 6Mbps
- USB Device connector: USB Type-A;
- Protection: self-recovery fuse, ESD protection
- UART interface connector: 6pin right-angle pinheader; 3pin connector
- protection: IO protection diode
Waveshare USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V
The Waveshare USB to UART/I2C/SPI/JTAG Converter is a versatile tool for interfacing various electronic devices with your computer. It supports multiple communication interfaces, including UART (Universal Asynchronous Receiver-Transmitter), I2C (Inter-Integrated Circuit), SPI (Serial Peripheral Interface), and JTAG (Joint Test Action Group). This makes it handy for debugging, programming, and communicating with a wide range of embedded systems and microcontrollers.
Weighing Load Cell Sensor 5kg YZC-131 With Wires
- The YZC-131A model
- Measurements: L x W x H = 75 x 13 x 13 mm
- Range: five kilogrammes
- 18 cm is the length of the cable.
- Screw Hole Size for Fitting: M3
- Output rating: 1.0 0.1mV / V
- Nonlinear: F.S. = 0.05%
- Hysteresis: F.S = 0.0%
- Frequency: 0.05% F.S.
WEMOS ESP8266 D1 Pro mini-16 m External Antenna Connector
- 11 digital input/output pins
- Interrupt/PWM/I2C/one-wire
- 1 analog input(3.2V max input)
- 16M bytes(128M bit) Flash
- External antenna connector
- Built-in ceramic antenna
- New CP2104 USB-TO-UART IC
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
White 4S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board
- 60A is the charging current.
- Ampere balance (Current): 50MA
- Balance function: yes
- Accuracy of voltage alignment: 3.355–3.455 V
White 8-Bit 5050 WS2811 LED RGB Full-Color Pipeline Lamp Module for Arduino without Soldering size:105*10mm
- 4 to 7 volts at the supply
- Current usage: each LED uses about 20 mA.
- There are eight LEDs.
- Dimensions of the strip: 105 x 10 mm
White ABS Plastic Case for UNO R3
- Made of high quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
White AC20-500V 0-100A 22mm AD16-22DVA Round LED Hertz Meter Indicator Light with Transformer
- Simple to set up
- Tiny and compact in dimensions
- This is a voltmeter and ammeter with dual displays.
- Sufficient safeguards against the environment
- Extremely low power usage
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...