Showing 2641–2652 of 4062 results
Shop
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupler
- Timing ranging from hours to microseconds.
- Simple design of circuits.
- Accurate Pulse Production / Timing.
- Duty Cycle Adjustment.
- Single-Static Process.
- Voltage (V) of supply: 12
- Modifiable Period(s): 0–10 AC Voltage (V) of control: 0-250 @ maximum 10A
- DC Control Voltage (V): max. 10A, 0–30
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
- Core chip: NE555
- Enter Data DC voltage range: 5–15 volts.
- Create a pulse that the MCU can alter.
- Create a tunable pulse to regulate the related circuitry.
NEMA 17 5.5 kg-cm Stepper Motor
- Step Angle: 1.8°.
- Current: 1.5 A /Phase.
- Holding Torque: 5.5 kg-cm.
- Detent Torque: 2.6 kg-cm
- Weight – 360 gm.
NEMA17 4.2 kg-cm Stepper Motor
- Step Angle: 1.8°.
- Current: 1.7 A /Phase.
- Holding Torque: 4.2 kg-cm.
- Voltage: 12~24VDC
- No of Leads: 4.
- Weight: 288 grams.
NEMA17 PR42HS8401S Stepper Motor-D Type Shaft
- Step Angle: 1.8 °
- 2.5 A/Phase Current
- Holding Torque: 4.8 kg-cm
- Lead Wires: 4
- Shaft Type: D-type
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
NEMA23 10.1 kg-cm Stepper Motor
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 10.1 N-cm
- Detent torque: 3.6 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm
NEMA34 46 kg-cm Stepper Motor – Keyway Type Shaft
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Holding Torque: 460 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm
NEMA34 87 kg-cm Stepper Motor – Keyway Type Shaft
- Step Angle Step Angle: 1.8 °
- Current: 5 A/Phase
- Holding Torque: 870 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm
NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
161 dBm is the tracking sensitivity.
148 dBm is the capture sensitivity.
average cold start time of 38 s
Warm start time on average: 35 sec
average hot start time: 1 second
Average capture time: 0.1s
NEO-6M GPS Module with EPROM
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
NEO-M8N GPS Module with Ceramic Active Antenna
- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
Load more products
Loading...