Showing 2857–2868 of 4062 results
Shop
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
PDB12-H4151-104BF – BOURNS
- Name: PDB12-H4151-104BF
- Case/Package: POT
PDB181-K220K-104B-Rotary Potentiometer
- Resistance of Track: 100 kohm
- Number of Turns: One
- Linear Track Taper
- 200mW of power
- Tolerance to Resistance: +/- 20%
Peacefair PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
- Trademark: Peacefair
- Make: PZEM-004T
- 80-260 VAC is the operating voltage.
- Voltage to Test: 80-260 VAC
- Rated Amperage: 100A
- Rated power: 22000W at 100A.
- frequency of operation: 45–65 Hz
- Measurement precision: 1.0
PG -11 WIRE WATERPROOFING LAND CONNECTOR
- Model: PG9
- Material: Heavy duty nylon Plastic
- Color: White
- Degree protection: IP67 (waterproof)
- Cable range: 4-8mm
- Thread outer diameter: approx. 15mm
- Thread length: Approximately. 9mm
- Total size: about. 24x32mm
PG-09 WIRE WATERPROOFING LAND CONNECTOR
The EV PG-09 wire waterproofing land connector is a waterproof connector designed for electric vehicles, specifically used to secure and protect wire connections from moisture and environmental factors.
PH Sensor Analog Kit for Arduino
Features:
- Heating voltage: 5 ± 0.2V (AC · DC)
- Working current: 5-10mA
- Detectable concentration range: PH0-14
- Detection Temperature range: 0-80 °
- Response time: ≤5S
- Settling Time: ≤60S
- Component Power: ≤0.5W
- Working temperature: -10 ~ 50 ° (nominal temperature 20 °)
- Humidity: 95% RH (nominal humidity 65% RH)
- Module Size: 42mm × 32mm × 20mm
- Output: analog voltage signal output
- With 4pcs M3 Mounting Holes
Ph Sensor module
This PH rod is designed on ATMEGA8 Ic .
On board LDR for light value, Thermister fortemperature value.
It gives Serial data at its Tx pin
PH value W: depth of rod immersed L : light value T temperature value
PH W L T
PH37A 8+8 Power Supply Adapter Board
- Type: 8+8Pin to 6+8Pin adapter
- Color: Black
- Model: PH37A
- Item size: 7.6 x 3.4 x 1.7cm
Photoelectric Speed Sensor Encoder Coded Disc code wheel
- Brand new and high quality.
- Small and Easy to use the module.
- It offers the fast response at a very good accuracy
- Two signal lines, one yellow, one blue.
- Yellow and blue are two TTL level signals
PI ZERO/ZERO W ENC28J60 Internet Module Supporting all RPI Board
- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 3.3V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with raspberry pi zero.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
Load more products
Loading...