Showing 2905–2916 of 4062 results
Shop
PIR Motion Sensor Detector Module HC-SR501
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20- 80°C
PIR Motion Sensor Detector Module HC-SR501
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
PIR2 433mhz Human Infrared Sensor for Sonoff RF Bridge
- 3V (2*AAA) is the voltage.
- Current on standby: ≤8μA
- Current alert: ≤15mA
- 433.92 MHz is the wireless frequency
- 1527 MHz is the wireless transmit code
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
Pixhawk Kit:
1 x Pixhawk V2.4.7 Flight board with Original Shell.
1 x Pixhawk PPM Encoder Module.
1 x NEO-M8N GPS Module with translucent Shell.
1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module Combo Kit
1 x Pixhawk V2.4.8 Flight board with Original Shell.
3 x Connecting Cables
1 x Buzzer Module
1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
1x NEO-M8N GPS Module with translucent Shell.
1 x GPS Folding Base Antenna set.
1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.
PIXHAWK 2.4.8 Combo Kit
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
Pixhawk I2C Port Expand Board with Cable
- Package Weight: 5 gm
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
Pixhawk Passive Buzzer and Switch
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Adopts E-Switch red light switch.
- Switch mounting hole diameter 8mm.
- The same version with 3DR official version.
Pixhawk PPM Encoder Module
- Support the input channels: 8
- Output: PPM SUM × 1 / MUX × 1
- Dimensions: 28 x 19 x 5 mm OR 23 x 16 X 7
- Weight: 12 gm. (containing all the input and output wires)
Pixhawk PX4 2.4.7 32Bits Flight Controller for Quadcopter Multicopter
- Processer:32bit STM32F427 Cortex M4,32-bit STM32F103
- Model: PX4
- Input Voltage:6-10 V
- RAM:256 KB
Pixy 2.1 Smart Vision Sensor-Object Tracking Camera
- Processor: NXP LPC4330, 204 MHz, dual core
- Image sensor: Aptina MT9M114, 1296×976 resolution with integrated image flow processor
- Lens field-of-view: 80 degrees horizontal, 40 degrees vertical
- Power consumption: 140 mA typical
- Power input: USB input (5V) or unregulated input (6V to 10V)
- RAM: 264K bytes
- Flash: 2M bytes
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...