Showing 3025–3036 of 4062 results
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
Original price was: ₹19,883.00.₹17,015.60Current price is: ₹17,015.60. (Incl. GST)- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
Rain Drop Sensor Module
Original price was: ₹177.00.₹147.50Current price is: ₹147.50. (Incl. GST)- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
RAMPS 1.4 3D PRINTER CONTROLLER+Mega2560 with Cable compatible with Arduino +5Pcs 4988 Driver With Heat Sink+LCD 128×64 Display Kit
Original price was: ₹4,130.00.₹3,835.00Current price is: ₹3,835.00. (Incl. GST)
RAMPS 1.4 3D Printer controller+Mega2560 with cable compatible with Arduino +5Pcs A4988 Driver with heat sink Kit
Original price was: ₹3,162.40.₹2,908.70Current price is: ₹2,908.70. (Incl. GST)- USB type B connector.
- Available as an SD Card add-on.
- Fits driver board for five Pololu steppers.
- When the heater is turned on, LEDs show it.
- Scalable to accommodate more accessories.
- Bed control with an extra 11A fuse for heating.
Raspberry Pi – Power supply, 48W, DC jack, EU plug, white
Original price was: ₹421.26.₹303.26Current price is: ₹303.26. (Incl. GST)Output voltage: 8 V DC
• rated load current: 6 A
• maximum power: 48 W
• short circuit protection
• overcurrent protection
• overvoltage protection
• efficiency: >88 %
• Output cable: 1.5 m (16AWG)
• Output connector: DC hollow plug (5.5×2.1×11 mm)
• Operating ambient temperature: 0 .. 40 °C
Raspberry Pi 1 Model A+
Original price was: ₹3,491.62.₹2,959.44Current price is: ₹2,959.44. (Incl. GST)- More GPIO pins.
- Micro SD.
- Lower power consumption.
- Better audio.
- Smaller neater form factor.
Raspberry Pi 1 Model B+
Original price was: ₹2,695.12.₹2,284.48Current price is: ₹2,284.48. (Incl. GST)- More GPIO pins.
- More USB ports.
- Micro SD.
- 100 Base Ethernet
- Lower power consumption.
- Better audio.
- Neater form factor.
Raspberry Pi 15W Official Black Power Supply (EU)
Original price was: ₹885.00.₹867.30Current price is: ₹867.30. (Incl. GST)- 5.1V / 3.0A DC output
- 1.5m 18AWG captive cable with USB-C output connector
- It has low power consumption on stand by mode
- It is compatible with Raspberry Pi 4 devices.
- it protects the device from short circuits and overloading
Raspberry Pi 2 Model B
Original price was: ₹3,773.64.₹3,198.98Current price is: ₹3,198.98. (Incl. GST)- 100 Base Ethernet
- 4 USB ports
- 40 GPIO pins
- Full HDMI port
- Combined 3.5mm audio jack and composite video
- Camera interface (CSI)
- Display interface (DSI)
- Micro SD card slot
- VideoCore IV 3D graphics core
Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
Original price was: ₹4,543.00.₹4,364.82Current price is: ₹4,364.82. (Incl. GST)- RAM: 1GB
- Processor: Broadcom BCM2837 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- Storage : SD/MMC/SDIO
- Power: 5V / 700mA~3A via micro USB
Raspberry Pi 3 Case for Raspberry Pi 3 Model B, B+ only Red/White
Original price was: ₹236.00.₹152.22Current price is: ₹152.22. (Incl. GST)- Snug and secure fit protect your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
- Dimensions: 98 x 72 x 26 (LxWxH) mm.
Raspberry Pi 3 Heat Sink set
Original price was: ₹188.80.₹152.22Current price is: ₹152.22. (Incl. GST)- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
