Showing 3037–3048 of 4062 results
Shop
Raspberry Pi 3 in 1 Heat Sink Aluminium for Raspberry Pi 4B (Gold) – Pack of 1
- The heat sinks have short profiles that are enough to fit within standard Raspberry Pi cases.
- The aluminum heatsinks work well to dissipate excess heat.
- Easy to apply, come with self-adhesive.
- Includes one large and two small heat sinks.Easy to apply heatsinks for a Raspberry Pi board
Raspberry Pi 3 Model A+
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- 4-pole stereo output and composite video port
Raspberry Pi 3 Model A+ with Official Raspberry Pi Case
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- ABS plastic official case (Red-white)
Raspberry Pi 3 Model B+ ADVANCED Starter Kit
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- The extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Raspberry PI 3 Model B+ Basic Kit
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
- HDMI (rev 1.3 and 1.4) Composite RCA (PAL & NTSC) Video Out.
- 3.5 MM Jack, HDMI Audio Out.
- MMC, SD, SDIO Card slot onboard storage.
- Ethernet speed: 300MBPS
Raspberry Pi 3 Model B+ BCM2837B0 SoC, IoT, PoE Enabled
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- Extended 40-pin GPIO header, Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port, DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
Raspberry Pi 3 Model B+ Starter Kit
- Pack contains quality products
- All products are tested and ready to perform
- All essentials to start with Raspberry Pi are Included in this Starter Combo
- Read the description below for more information
Raspberry Pi 3 Universal Power Supply | microUSB
- microUSB Power Supply
- 5 Volts 2.5Amp Power Supply
- Suitable for Raspberry Pi 1, 2, 3, Zero and ZeroW
Raspberry Pi 4 2GB Starter Kit with Official 7 inch Touch Display
With the new upgrade to the Pi family, this is a complete starter kit of Raspberry Pi 2GB with all the mandatory accessories. These include products,
- Raspberry Pi 4 Model B with 2GB RAM
- USB type-C power supply
- Micro to standard HDMI cable
- Official Raspberry Pi 4 case-red-white.
- Sandisk Micro SD/SDHC 16GB Class 10 Memory Card (Upto 98MB/s Speed)
- 7″ Official Raspberry Pi Display with Capacitive Touchscreen
Raspberry Pi 4 Aluminium Heat Sink Set of 4
- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B
- Material: aluminum
- Color: Black
Raspberry Pi 4 Black Compact ABS Case
- Only 3-piece ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- locking screw holes and anti-slip rubber feet at the back.
Raspberry Pi 4 Black Compact ABS Case with Cooling Fan Slot
- ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Cut-out for micro SD card at the bottom panel
- Locking screw holes and anti-slip rubber feet at the back.
Load more products
Loading...