Showing 3061–3072 of 4062 results
Shop
Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module
- Voltage level: 1.8V-6V
- Dimension: 38mm x 31.6mm
- Conversion level range: 1.8 V-6 V
- Instructions for use: (3.3 V, 5 V to each other)
- 4 pairs of power supply interfaces, supports more situation
- Use tantalum capacitors for power filter, provides more stability
- VCCB 5V power supply (can be an external 5V power supply)
Raspberry Pi 8-ch Relay Expansion Board
- Power supply voltage: 5V
- Trigger signal: 3.3V/5V
- Relay channels: 8-ch
- Contact form: SPDT-NO,NC
- Closed current: 6mA (per channel)
Raspberry Pi 8MP Camera Module V2 with Cable
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
Raspberry Pi Accessory, Raspberry Pi 4 Model B Official PSU, USB-C, 5.1V, 3A, UK Plug, White
- Comes with UK PLUG
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- USB-C connection goes straight into your Raspberry Pi
Raspberry Pi Acrylic Zero Acrylic Case Protection Box
- High-quality acrylic material, very durable
- Compatible with the cooling fin of the fan.
- Package including two shells and screws.
- Designed especially for Raspberry Pi Zero, full access to all controls and features.
- Used for the installation of building blocks on the shell.
Raspberry Pi Build HAT
- Input Voltage:7.2-8.5 V
- GPIO pins:40
- Interface Connector Type: LPF2
- Easy-to-use Python library to control your LEGO Technic devices
- Onboard Raspberry Pi RP2040 microcontroller manages low-level control of LEGO Technic devices
Raspberry Pi Camera Cable – Standard-Mini – 500mm
Use this 500mm adapter cable to connect your camera module with a standard 15-way connector to the Raspberry Pi 5 or Zero.
Raspberry Pi Camera Cable Standard – Mini – 200mm
- Length: 200mm, providing a flexible connection between the camera and the Raspberry Pi.
- Compatibility: Works with Raspberry Pi 5 and all Raspberry Pi Zero models.
- Connectors: Features a 22-way 0.5mm-pitch connection for the Raspberry Pi end and a 15-way 1mm-pitch connector for the camera end.
- Shielded Cable: Ensures a stable and clear connection for high-quality imaging.
- Clear Labeling: The cable is clearly labeled to avoid confusion with similar-looking display cables.
Raspberry Pi Camera FFC FPC Flexible Display Cable – 30CM
- FFC soft cable 0.5 pitch 36pin, the direction is of the same direction
- Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm) Spacing algorithm: bus width / (number of pins+ 1)
- Direction (check the ends of the cable): A with the same direction (metal surface in the same side)
- Test with Lerdge board. Use the board test with the 2 meters cable (without shielding tape), and with the cable winding the stepper motor. The touch screen display operation is normal, no interference phenomenon, the test passed.
- Compatible with NoIR camera for Raspberry Pi and 3D PRINTER
Raspberry Pi Camera Module 3
- Variants: Standard
- Powered autofocus.
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 76º
- Improved low-light sensitivity.
- Compatible with all models of Raspberry Pi*
Raspberry Pi Camera Module 3 NoIR
- Variants: NoIR
- Powered Autofocus
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 76º
- Improved low-light sensitivity
Raspberry Pi Camera Module 3 NoIR – Wide
- Variants: NoIR-Wide
- Powered autofocus.
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 120º
- Improved low-light sensitivity.
Load more products
Loading...