Showing 3337–3348 of 4062 results
Shop
SeeedStudio Grove Beginner Kit for Arduino
- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SeeedStudio Grove Flame Sensor
- Operating voltage (DC): 4.75 V to 5.30 V, typical 5 V
- Spectral bandwidth : 760 nm to 1100 nm, typical 940 nm
- Current: 20 mA
- Detection range: 0 – 1 m
- High photo sensitivity
- Fast response time
- Adjustable sensitivity
- FOR BULK B2B ENQUIRIES KINDLY MAIL @ibots.in,
SeeedStudio Grove LED Strip Driver
- 9V/1A: RGB LED strip: White: Max Current
-
-
-
-
-
-
- 365
- 627
-
-
-
-
-
-
- 12V/5A: RGB LED strip: White: Max Current
-
-
-
-
-
-
- 1032
- 1822
- 2430
- 2800
- 3000
-
-
-
-
-
-
SeeedStudio Grove Light Sensor
For bulk and B2B enquiries kindly mail us at info@ibots.in
- Operating voltage: 3 to 5 V
- Operating current: 0.5 mA to 3 mA
- Peak wavelength: 540 nm
- Quick response time
- Analog value output
- High reliability and sensibility
- Small footprint
SeeedStudio Grove Multi Color Flash LED (5 mm)
- Operate Voltage: 3.3V/5V
- Emitting color: Multicolor flash (red, green, blue, and white)
- Easy to use for all Grove users (especially beginners)
SeeedStudio Grove Recorder v3.0
- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
SeeedStudio Grove Speaker
- DC operating voltage: 4 to 5.5 volts
- Maximum voltage gain: 46 dB
- 20 kHz is the bandwidth.
- The audio amplifier LM386
- Volume that can be changed
- Grove-compatible user interface
SeeedStudio Grove Water Atomization v1.0
- Working voltage: DC 5.0 volts
- Ripple (max power): less than 100 mV
- Maximum power of 2W
- Maximum voltage output: 65±5V
- Heated using ultrasonography
- Simple to develop a prototype for
SeeedStudio GrovePi+
- Working Voltage: 5V
- MCU: ATMEGA328P
- Dimensions 88mm x58mm x23mm
- Weight: 51g
- Raspberry Pi Connector Pins: 26
Select 16 A-230 Time Switch (60x 35×90 mm, White)
| Colour | White |
| Brand | Selec |
| Item Dimensions LxWxH | 9.4 x 3.5 x 6.4 Centimeters |
SEN-HZ21WI 1/2″ Brass Water Flow Sensor
Specifications of SEN-HZ21WI Water flow Sensor
- Model : SEN-HZ21WI
- Water quality requirement : Drinking water health standards, 0~80℃
- Flow range : 1~ 30 Liter/min
- Withstand hydraulic pressure : ≤1.75 MPa
- Voltage/electric current : DC4.5~18V, ≤15mA
- Insulation resistance : >100MΩ
- Electrical strength : AC500V, 50HZ
- Output level : Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤ 0.5 Volt
- Pulse duty cycle : 50%
- Flow characteristic : F=10 Q-4, F:HZ, Q:L/min,±10%
- Cumulative flow conversion : 1 Liter water = 553 pulses , accuracy: 10%
SEN-HZ21WI 1/2″ Brass Water Flow Sensor
Note:-
- When magnetic material is close with the sensor, its characteristics may vary.
- In order to avoid particle debris, the sensor must be installed after a filter.
- The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor’s measurement accuracy.
Load more products
Loading...