Showing 361–372 of 524 results
MPU-6050 3-Axis Accelerometer and Gyro Sensor Module
Original price was: ₹295.00.₹236.00Current price is: ₹236.00. (Incl. GST)- Operating Voltage: 3 to 5V DC
- Communication Protocol: I2C
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Driver Chip: MPU6050
- Max. No. load starting frequency: ≥1500pps
- Max. No. load running frequency: ≥8000pps
MQ-131 Ozone Gas Detector Sensor Module
Original price was: ₹2,478.00.₹2,183.00Current price is: ₹2,183.00. (Incl. GST)- Fast response characteristics
- Mounting holes to facilitate fixed installation
- The probe can plug design for easy testing.
- Signal light indicates the output
- Dual signal output (analog output, and TTL-level output)
- TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
MQ-3 Alcohol Detector Gas Sensor Module
Original price was: ₹234.82.₹177.00Current price is: ₹177.00. (Incl. GST)- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
Original price was: ₹236.00.₹177.00Current price is: ₹177.00. (Incl. GST)MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery. FOR BULK B2B ENQUIRIES MAIL US @ibots.in
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Original price was: ₹188.80.₹129.80Current price is: ₹129.80. (Incl. GST)- DC 5 V is the operating voltage.
- The analogue output voltage increases with increasing concentration.
- The more sensitive carbon monoxide detection.
- With dependable stability and an extended service life.
- Quick reaction times and recuperation traits.
- 10–1000 parts per millilitre.
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
Original price was: ₹234.82.₹177.00Current price is: ₹177.00. (Incl. GST)- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
MQ135 – Air Quality Gas Detector Sensor
Original price was: ₹247.80.₹159.30Current price is: ₹159.30. (Incl. GST)Features :
- Sensitivity to Ammonia, Sulphide, and Benzene steam
- With signal output instructions
- The TTL output signal is a low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
MQ2 Smoke LPG Butane Gas Sensor Module
Original price was: ₹206.50.₹177.00Current price is: ₹177.00. (Incl. GST)- Operating Voltage is 5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer
- Long life and low cost
- Simple drive circuit
Multitec 07 Heavy Duty Nipper
Original price was: ₹191.16.₹125.08Current price is: ₹125.08. (Incl. GST)- H: 1 cm L: 12 cm W: 50 g.
- 0.8mm to 1.2mm copper and aluminium conductors can be cut using this multipurpose tool.
- Constructed from premium alloy steel with cutting edges heat-treated to 60 HRC and a black oxide finish.
- Ideal for accessorising printed circuit boards with components.
- Superior quality ABS plastic handles.
Multitec 68 C Wire Cutter – Stripper
Original price was: ₹112.10.₹84.96Current price is: ₹84.96. (Incl. GST)- Superior PVC-cushioned grips
- Comes with gauge adjuster and spring.
- Fit for any purpose
- Extremely well-groomed, sharp cutting edges
N20 150 RPM DC Motor for Robotics High Torque
₹354.00 (Incl. GST)- This is a 150 RPM DC Mini Metal Gear Motor designed for compact robotics applications.
- Ideal for building robot cars, DIY robots, and other small robotic projects.
- Lightweight and compact, making it easy to integrate into space-constrained projects.
- Built with durable construction and fine craftsmanship for reliable performance.
- The motor’s output shaft allows you to easily mount compatible wheels for robot car and other mechanical applications.
N20 Micro Gear Motor Mount – V2(Pegboard) – 3D Printed
₹206.50 (Incl. GST)A 3D-printed mount designed to hold an N20 micro gear motor in place on a compatible pegboard or robotics setup. Suitable for DIY robotics, prototyping, and educational projects.
Specifications
-
Product Type: 3D-Printed Motor Mount
-
Compatibility: N20 Micro Gear Motor
-
Version: V2
-
Mounting Type: Pegboard Mounting
-
Material: 3D-printed plastic
-
Dimensions (L × W × H): 14 × 30 × 23 mm
