Showing 361–372 of 508 results
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
Original price was: ₹470.00.₹350.00Current price is: ₹350.00.- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
Nano CH340 Chip Board Compatible with Arduino (Soldered)
Original price was: ₹450.00.₹350.00Current price is: ₹350.00.- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
NEMA 17 5.5 kg-cm Stepper Motor
Original price was: ₹1,650.00.₹1,400.00Current price is: ₹1,400.00.- Step Angle: 1.8°.
- Current: 1.5 A /Phase.
- Holding Torque: 5.5 kg-cm.
- Detent Torque: 2.6 kg-cm
- Weight – 360 gm.
NEMA23 10.1 kg-cm Stepper Motor
Original price was: ₹2,000.00.₹1,750.00Current price is: ₹1,750.00.- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 10.1 N-cm
- Detent torque: 3.6 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm
NEO-6M GPS Module with EPROM
Original price was: ₹475.00.₹400.00Current price is: ₹400.00.- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
NEO-M8N GPS Module with Ceramic Active Antenna
Original price was: ₹1,350.00.₹1,150.00Current price is: ₹1,150.00.- Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
NJM4558 (JRC4558) – (SMD/SMT) Dual Operational Amplifier
Original price was: ₹54.00.₹31.00Current price is: ₹31.00.- IC Name: NJM4558
- Package/Case: SMD-8
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
Original price was: ₹410.00.₹350.00Current price is: ₹350.00.- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
Noel 25W 230V Sodering Iron Model-GOLD
Original price was: ₹238.00.₹170.00Current price is: ₹170.00.The Noel 25W 230V Soldering Iron, Model GOLD, is a reliable tool for precise soldering tasks in electronics repair, prototyping, and hobbyist projects. Its lower wattage and fine tip make it suitable for delicate work, while its ergonomic design and durability ensure comfortable and long-lasting use. Proper maintenance will help prolong its lifespan and ensure consistent performance.
- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
Obstacle Avoiding Robot
Original price was: ₹4,500.00.₹4,250.00Current price is: ₹4,250.00.
Official Micro-HDMI (Male) to Standard HDMI (Male) Black Cable-2m for Raspberry Pi
Original price was: ₹650.00.₹479.00Current price is: ₹479.00.- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models.
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Original price was: ₹510.00.₹399.00Current price is: ₹399.00.- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- Large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models.
