Showing 397–408 of 4075 results
Shop
3/4 inch-YFS403 5-18V Water Flow Sensor
- Working voltage range: DC 5 – 18V.
- Load capacity: ≤ 10 mA (DC 5V).
- Working temperature: ≤ 80 ℃
- Lightweight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- The seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
30 A Brushed ESC No Brake
30A brushed ESC item
Supported voltages: 4–8 V.
Proceed 30A
Peak value at instantaneous 40A
20A UBEC output in reverse: voltage of 5.7V, current of 1A.
30 A Brushed ESC with Brake
30A brushed ESC item
Supported voltages: 4–8 V.
Proceed 30A
Output voltage of UBEC: 5.7V, current of 1A.
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
30 TEETH MOTORS CHAIN SPROCKET WHEEL
A “30 teeth motor chain sprocket wheel” likely refers to a specific component used in a chain drive system, often found in electric bicycles, motorcycles, or other vehicles with electric motors.
30 Teeth Nylon Metal Insert Spur gear (1.25M-30T-8-37.5)
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
300 mAh 3.7V single cell Rechargeable LiPo Battery
- Goods: Compact Lithium-Pouch
- The voltage is 3.7 volts.
- 300 mAh is the capacity.
- Rate of Discharge: 0.2C
- Weight: 8 grammes
- Measurements: 30 x 20 x 6 mm
- Ideal for Portable Devices and IoT Applications
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
300 RPM BO Motor-Straight
- Low density equals low mass and inertia.
- Ability to take in vibration and stress thanks to elastic compliance.
- Because of its natural lubricity, it can function with little to no lubrication.
- The low coefficient of friction in comparison.
- Voltage drop (VDC): 3–12 Shaft Length: 8.5 mm Shaft 5.5 mm in diameter (Double D-type)
- Current without load: 40–180 mA.
- 300 RPM is the rated speed (after reduction).
- Torque Rated: 0.35 kg cm
300 RPM Dual Shaft BO Motor-Straight
- Low density equals low mass and inertia.
- Ability to take in vibration and stress thanks to elastic compliance.
- Because of its natural lubricity, it can function with little to no lubrication.
- The low coefficient of friction in comparison.
- Voltage drop (VDC): 3–12 Shaft Length: 8.5 mm Shaft 5.5 mm in diameter (Double D-type).
- Current without load: 40–180 mA.
- 300 RPM is the rated speed (after reduction).
- Torque Rated: 0.35 kg cm.
300 RPM L-Shape BO Motor
- Low density equals low mass and inertia.
- Ability to take in vibration and stress thanks to elastic compliance.
- Because of its natural lubricity, it can function with little to no lubrication.
- The low coefficient of friction in comparison.
- Voltage drop (VDC): 3–12 Shaft Length: 8.5 mm Shaft 5.5 mm in diameter (Double D-type)
- Current without load: 40–180 mA.
- 300 RPM is the rated speed (after reduction).
- Torque Rated: 0.35 kg cm
3000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V)
- Voltage input: 220 volts AC.
- 3000W of maximum power.
- Variable Voltage: AC 0–220V.
- Frequency of AC: 50-60 Hz.
- About 57 x 49 x 27 mm is the size (LxWxH).
- Material: Metal and plastic.
3007 PI-Fan 30 x 30 x 7MM Black 2 x 1p
- Ideally suited for the extruder
- Silent Performance
- Extremely low usage of current
- Simple to connect to and install.
300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw 304 stainless steel is the material.
Dimensions: 300 mm in length.
8 mm in diameter.
Brass Nut with 4 Start Lead Screw Dimensions: 10 x 13 x 22 mm.
mostly used to drive guide rails using stepping motors.
T-shaped design, composed of premium stainless steel.
Both convenient to use and simple to install.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance







Motors