Showing 433–444 of 2380 results
Shop
915Mhz 100mW Mini Telemetry Kit
- Compact and lightweight
- MAVLink protocol for framing and reporting status
- Changeable ground and air modules
- USB micro-port with UART interface
- Up to 25% of bit mistakes are corrected with error correction.
- Configurable using APM Planner and Mission Planner
- The several-kilometer range that a tiny Omni antenna has been shown to have
915Mhz 500MW Telemetry Kit
- Product: 500MW Telemetry Kit at 915 MHz with UART interface
- Clear serial connection
- SIK firmware that is available for free
- Configurable using *APM Planner and *Mission Planner
9225 DC24V Oil Containing Silent Bearing Cooling Fan
- 9225 DC is the model number.24V
- Voltage supply: 24 volts DC
- Present: 0.085 amps
- 2.28 watts of power
- Volume of air: 55 CFM
9V Cell Box, without Cover – 2pcs
- Material: Plastic
- Output Voltage(V): 9
- ON/OFF Switch: NO
- Cable Length: 15 cm
- Color: Black
- Dimensions in mm (LxWxH): 54x30x18
- Weight (gm): 7
A Set of 150mm Long Heat Shrink Sleeve (1mm to 5mm) Red and Black Industrial Grade WOER (HST)
- This set includes 10 heat shrink sleeves with varying diameters.
- Size: 1, 2, 3, 4, 5 mm in diameter
- Colour: Red and Black
- 150 mm in length
- 2:1 is the shrink ratio.
- Temperature range for operation (°C): -40 to 125
- Tensile Power: <10.4 MPa
- ≥200% Elongation Ratio
- Ratio of Radial Shrinking: ≥50%
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
A Set of Multicolor 150mm Long Heat Shrink Sleeve-3mm Industrial Grade WOER (HST)
- This is a set of multicoloured heat shrink sleeves
- 3 mm in diameter
- 150 mm in length
- 2:1 is the shrink ratio.
- Temperature range for operation (°C): -40 to 125
- Tensile ≥10.4 Mpa of strength and ≥200% of elongation ratio
- Ratio of Radial Shrinking: ≥50%
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
A Set of Multicolor 150mm Long Heat Shrink Sleeve-4mm Industrial Grade WOER (HST)
- This is a set of multicoloured heat shrink sleeves
- 4 mm in diameter
- 150 mm in length
- 2:1 is the shrink ratio.
- Temperature range for operation (°C): -40 to 125
- Tensile ≥10.4 Mpa of strength and ≥200% of elongation ratio
- Ratio of Radial Shrinking: ≥50%
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
A03B 1 Road 5v Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse
- Voltage trigger: 5VDC
- Current trigger: 2 mA
- Voltage for Switching: 240VAC @ 2A
- Triggering: Minimal
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
A2212 13T 1400KV Brushless Motor for Drone and SimonK 30A ESC
- Offers great performance and value for money.
- Comes in the compact sizes.
- Suitable for airplane, aircraft, quadcopter.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and 1045 Propeller Set
- Offers great performance and value for money.
- Comes in the compact sizes.
- Suitable for airplane, aircraft, quadcopter.
- ESC used has an On-Board BEC.
- Faster and Better speed control.
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
A2212 Motor Prop Adapater (Collet Type)
- Excellent quality and brand new.
- simplicity of interface.
- In line with a 4 mm shaft.
- Aluminum construction that is devoid of rust and stains.
A3967 Stepper Motor Driver For Arduino
- Energy source: 7–30 volts.
- At high speeds, the torque increases with voltage.
- variable current control, 150 mA to 750 mA per phase.
- Voltage for logic: 3.3V or 5V.
- Microstepping driver A3967.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...