Showing 601–612 of 2404 results
ATmega328P-U PDIP-28 Microcontroller
Original price was: ₹620.00.₹399.00Current price is: ₹399.00.The most single-clock cycle execution of 131 potent instructions and 32 x 8 general-purpose working registers.
Completely stationary functioning.
20MHz throughput of up to 20MIPS.
2-cycle on-chip multiplier.
Write and erase cycles: 100,000 EEPROM and 10,000 flash.
Section of boot code that is optional and has separate lock bits.
Utilising an on-chip boot programme for system programming.
True read during the writing process.
Lock programming for software protection.
Two 8-bit timer/counters, each with its own comparison and prescaler modes.
One 16-bit timer/counter with independent modes for comparison, capture, and prescaler.
A separate oscillator and real-time counter.
Atomstack A5 PRO+ 40W Laser Engraver Cutting Machine
Original price was: ₹33,600.00.₹32,199.00Current price is: ₹32,199.00.- Product model ATOMSTACK A5 PRO+ 40W
- Machine power 40W
- Laser output optical power 5-5.5W
- Laser wavelength 455±5nm
- Engraving accuracy 0.01mm
Atomstack A6 Pro 50W Laser Engraver Cutting Machine
Original price was: ₹49,500.00.₹48,299.00Current price is: ₹48,299.00.- Model: 50W Laser Engraver Cutting Machine, Atomstack A6 Pro.
- Fixed focus laser or no focus is the focusing mode.
- Laser shield: The laser has an eye-protecting shield that keeps the user’s eyes safe; extra goggles are not necessary.
- Operating Software: LightBurn, LaserGRBL; compatible with Windows, Linux, and macOS.
- File formats supported include JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, and DXF.
- Method of Data Transfer: USB, APP.
- Power Source: Power of international standards.
- Accreditation: CE FCC RoHS FDA PSE
Atomstack S10 Pro 50W Laser Engraver and Cutting Machine
Original price was: ₹46,099.00.₹44,070.00Current price is: ₹44,070.00.- Atomstack S10 Pro model
- 50W machine power
- Power of Laser Output: 10-11W
- Length of Wave: 445 ± 5 nm
- Precision of engraving: 0.01 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Atomstack X20 Pro 130W Quad-Laser Engraving and Cutting Machine Built-in Air Assist System
Original price was: ₹82,000.00.₹80,800.00Current price is: ₹80,800.00.- 130W of machine power
- 90W of electricity
- 20–21 W of laser output power
- Length of Wave: 445 ± 5 nm
- Precision of engraving: 0.01 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
ATTINY85 USB Development Board
Original price was: ₹400.00.₹375.00Current price is: ₹375.00.- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
ATX 24P M-F Extension Power Lines About 30CM
Original price was: ₹298.00.₹220.00Current price is: ₹220.00.- ATX 24P is the model.
- Product: Power Line Extensions
- Colour: As shown in the pictures
- Measurements in length: 30 cm
- Features of cable: 2-24-pin
Audio Jack – 3.5mm TRRS (SMD)- 4Pcs
Original price was: ₹115.00.₹78.00Current price is: ₹78.00.- Certification: REACH and RoHS
- Model DG
- 220V is the rated voltage
- Rated Current: 0.5 MA
- Material: POM plastic (POM-450 Japan), 59% copper rod
- Test for Salt Spray: 24 hours
- Female gender
- Durability More than 5000 cycles
Auto-Calibrating Line Sensor LSS05
Original price was: ₹1,550.00.₹1,140.00Current price is: ₹1,140.00.
- 5V power, reserve polarity protected
- 5 digital outputs representing the logic of 5 IR sensor, represented with indicator each.
- Calibration button for easily calibrating the sensor
- Dimensions: 64x28x10 (LxWxH) mm.
- Weight: 8 gm.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
AUTOMOBILE SEAT OCCUPANCY SENSORS
Original price was: ₹780.00.₹599.00Current price is: ₹599.00.- Car Seat Pressure Sensor Safety Belt Warning Reminding Pad Occupied Seated Alarm is a safety belt reminder system in the vehicle triggers a warning light or an audible bell ring, reminding unbuckled seat occupants to fasten their safety belts.
- The seat safety belt reminder sensor detects occupants in passenger and rear seats.
- It is assembled between the sponge and the steel base. It provides maximum safety for passengers in car.
AVerMedia D131L Carrier Board for NVIDIA® Jetson Orin™ NX / Orin™ Nano modules
Original price was: ₹19,978.00.₹13,570.00Current price is: ₹13,570.00.2 x 2 Lane MIPI CSI-2 Camera input/ 1 x 4 Lane MIPI CSI-2 Camera Input
2 x M.2. for Wi-Fi, SSD and Capture card
1 x GbE RJ-45 (Option PoE), 40-pin expansion header
4 x USB 3.1 Gen 1 and 1 x 4Kp60 HDMI output
1 x micro-SD card slot
Operating temperature: 0°C ~ 70°C (TBD)
Dimension: 113mm(W) x 105mm(L) x 28.53 mm(H)
Weight: 95g
AVR ISP 10 Pin to 6 Pin Adapter Board
Original price was: ₹99.00.₹59.00Current price is: ₹59.00.- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
