Showing 625–636 of 2389 results
Benewake TF-LC02 Lidar Range Finder Sensor Ranging
Original price was: ₹949.00.₹849.00Current price is: ₹849.00.
- Measuring range: 3cm~200cm at 90% reflectivity
- Detection speed: 33 msec
- Accuracy: ±2cm at (3cm-100cm); ±5% at (100-200cm)
- Storage temperature: -20-85°C
Benewake TF-SV24S08 Lidar Range Finder Sensor Ranging Module
Original price was: ₹4,999.00.₹4,259.00Current price is: ₹4,259.00.- Distance range up to 8
- Meters
- High accuracy
- Tiny Size
- Low power consumption
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver
Original price was: ₹2,100.00.₹1,399.00Current price is: ₹1,399.00.- Two stabilising axes
- Supply Voltage: 3s–4s LiPo at 8V–18V
- Maximum DC current of 2.8A for per motor
- MPU6050 sensors are supported
- Yes, overcurrent protection
- Protection against overheating: Yes
- Yes, undervoltage protection
- Protection from reverse polarity: Yes
- Support gimbal motors in the 2–8 series
- Maximum current of 10A
BH1750 – Light Intensity Sensor Module
Original price was: ₹222.00.₹149.00Current price is: ₹149.00.Features:
- No ambient light distinction
- High precision determination accurate to 1 Lu for different lights
- ROHM original package BH1750FVI chip
BIGTREETECH BTT SKR MINI E3 V3.0 32 Bit Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 plus/CR-10
Original price was: ₹4,750.00.₹4,485.00Current price is: ₹4,485.00.- Enhanced heat dissipation signal capabilities and interference prevention
- Supports automated shutdown (PS-ON), filament detection, power off resumption, BLtouch, and more.
- Enhanced ability to cool
- Various modes of operation
- Simple to use
- Increased steadiness
BIGTREETECH SKR 2 Motherboard 32Bit Board Upgrade for 3d Printer Machine
Original price was: ₹7,500.00.₹7,000.00Current price is: ₹7,000.00.Product Specification SKR 2:
| Size: | 110mm x 85mm |
| Distance between installation hole centers： | 102mm*76mm |
| Microprocessor: | ARM Cortex-M4 CPU STM32F407VGT6 |
| Input voltage: | DC12V-DC24V |
| Logic voltage: | DC 3.3V |
| Firmware support: | Marlin, RepRap Firmware |
| WIFI interface: | ESP-12S, ESP-07S |
| Fan interfaces: | Three PWM fans, two always-on fans |
| Expansion interfaces: | I2C, Servos, Probe, PS-ON, PWR-DET, Fil-DET, RGB, etc |
| Motor driver: | support TMC5160, TMC2209, TMC2225, TMC2226, TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, etc., and can be externally connected to a motor drive. |
| Supported stepper driver interfaces: | SPI, UART, STEP/DIR |
| Motor driver sockets: | X, Y, Z (double Z axis), E0, E1, five channels (each channel also has a closed loop drive interface) |
| Temperature sensor interfaces: | TH0, TH1, TB. 3 Channels, 100K NTC (thermal resistance) |
| Display interfaces: | Serial touch screen, SPI touch screen, LCD display |
| PC communication interfaces: | USB type B with configurable BAUD |
| Command file format support: | G-code or according to the installed OS |
| Supported kinematics: | XYZ, delta, kossel, Ultimaker, corexy, etc. |
| Recommended software: | Cura, Simplify3D, pronterface, Repetier-host, Makerware |
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
Original price was: ₹99.00.₹60.00Current price is: ₹60.00.- 250V is the rated voltage.
- Present: 5A
- 80°C is the temperature.
- The length of the cable is 73 mm.
- Dimensions of the head: 20 x 8 x 4 (LxWxH) mm
- Electrical circuits are made and broken mechanically.
- This compact, convenient module is simple to operate.
- Serves as a circuit breaker controlled by temperature.
Black 1M Double End Test lead Wire 4mm Banana Plug Alligator Clip Crocodile 15A
Original price was: ₹255.00.₹206.00Current price is: ₹206.00.- Shade: Black
- Length: one metre
- Capacity: 15 A at current
- Simple installation
- Suitable for 4mm Banana Plug
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Black Aluminum Heat Sink Case with Double Fans for Raspberry Pi 4 Model B
Original price was: ₹1,100.00.₹950.00Current price is: ₹950.00.- Type: Raspberry 4B Aluminum Alloy Metal Case
- Material: Black Aluminum Alloy Metal
- Compatible For：Raspberry PI 4
- Easy to install, Ultra-thin design.
- Open case design with Daul Fans for Fast Heat dissipation.
- Weight: 110gm
Black Aluminum Heat Sink Holder for 12mm Laser Module
Original price was: ₹330.00.₹299.00Current price is: ₹299.00.- Anodized on the surface; effective antioxidant
- In can be installed directly on the laser gimbal
- For the heat dissipation of the laser module
- Sturdy and durable
- Easy to install with efficient heat dissipation
- Fit for 12mm laser module(100mW blue laser module,250mW red laser module)
Black IR Remote Control (Without Battery)
Original price was: ₹69.00.₹59.00Current price is: ₹59.00.- Required Battery: CR2025
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Effective life: 20,000 times
Black Open Ended GT2 Belt Width 6mm with Steel Wire (Hard Handfeel)
Original price was: ₹145.00.₹80.00Current price is: ₹80.00.- Material: Steel wire and neoprene rubber Core Dimensions: 6 mm
- Colour: Black
- Length of belt: one metre
- Lightweight
