Showing 697–708 of 2404 results
CJMCU-123 WS2812 RGB LED Breakout Module
Original price was: ₹58.00.₹35.00Current price is: ₹35.00.- 5V is the supply voltage.
- Angle of view: 120 degrees
- The light’s hue remained remarkably constant.
- A lamp strip with a full-color soft light module.
- Electric reset and power loss reset circuits built in.
- A full-color display with 16 million colours and 256 brightness levels is possible for each of the three primary colour pixels, provided that the scan frequency is at least 400 Hz/s.
CJMCU-219 INA219 I2C Interface Power Supply Monitoring Module.
Original price was: ₹315.00.₹249.00Current price is: ₹249.00.Features:
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- 0.9″ x 0.8″ PCB
- PCB (no header or terminal block): 1.9g
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power
- 16 Programmable Addresses
- Filtering Options
- Calibration Registers
- SOT23-8 and SOIC-8 Packages
CJMCU-34725 TCS34725 Color Sensor RGB Module
Original price was: ₹299.00.₹240.00Current price is: ₹240.00.- Current Voltage: 3.3 volts
- Voltage of supply: 3.3V–5V
- Bright light sensing and red, green, and blue (RGB) digital return values are provided by the TCS3472 device.
- Accuracy in colour management is higher.
- the extreme sensitivity.
- broad dynamic range.
- With its IR shading filters, the TCS3472 is perfect.
CJMCU-4051 74HC4051 8 Channel Analog
Original price was: ₹105.00.₹99.00Current price is: ₹99.00.Wide Analog Input Voltage Range: +/-5V
2.Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V
3.Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
4.Board Size: 30 x 19 mm
CJMCU-TEMT6000 An Ambient Light Sensor
Original price was: ₹198.00.₹147.00Current price is: ₹147.00.- AEC-Q101 qualified
- High photosensitivity
- Near-Human Eye Spectral Response
- Scalable Output Voltage
- Adapted to human eye responsivity
- Lead (Pb)-free reflow soldering
- Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
CJMCU-TRRS 3.5mm Jack AV Stereo Module
Original price was: ₹79.00.₹59.00Current price is: ₹59.00.- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- Dimensions: 20 x 16 x 8(L x W x H) mm
- Weight: 2 gm
CL10B103KC8WPNC SAMSUNG ELECTRO-MECHANICS MLCC SMD Capacitor AEC-Q200, 0.01uF, 100V, 0603 ( Pack of 5)
Original price was: ₹65.00.₹29.00Current price is: ₹29.00.0.01uF of capacitance
DC voltage: 100V
Package / Case for Capacitor: 0603 [1608 Metric]
X7R Capacitor Terminals: Wraparound Dielectric Property
Cleaning Nozzle Drill 0.6mm (Price for Each Box, 10pcs/box)
Original price was: ₹320.00.₹239.00Current price is: ₹239.00.- Length: 4 cm
- Head Measurement: 0.6 mm
- Diameter of Shank: 3.17 mm
- Size: around 0.1 to 1.
- Skin tone
- Any owner of a 3D printer has to have one of these powerful instruments, nozzle drill cleaners.
- Nozzles need to be cleaned to maintain flowing printing because blocks occur frequently during printing.
Cleaning Nozzle Drill 0.8mm (Price for Each Box, 10pcs/box)
Original price was: ₹449.00.₹360.00Current price is: ₹360.00.- Length: 4 cm
- Head Measurement: 0.8 mm
- Diameter of Shank: 3.17 mm
- Size: about 0.1 to 0.8
- Shade: Purple
- Any owner of a 3D printer has to have one of these powerful instruments, nozzle drill cleaners.
- Nozzles need to be cleaned to maintain flowing printing because blocks occur frequently during printing.
CNC Aluminum Steering Servo Horn Arm for Futaba Standard 25T
Original price was: ₹78.00.₹56.00Current price is: ₹56.00.- Gear Teeth: 25T
- Material: Aluminum
- Overall length: 35mm
- Thickness: 4mm
CNC GPS Anti-interference Antenna Mount Holder Case for APM Quadcopter
Original price was: ₹380.00.₹279.00Current price is: ₹279.00.Keep the GPS safe. Keeping electromagnetic interference at bay
produced by CNC
Composition: Aluminium
Red and black are the colours.
50mm Height; 55mm Inner Diameter of the Disc
Disc Depth: 12 mm
18 grams in weight
Note: This stand comes in Red and Black colour we will ship it randomly according to availability.
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
Original price was: ₹1,109.00.₹1,049.00Current price is: ₹1,049.00.- Adjusting the laser power.
- Low light function.
- Full opto-isolation.
- Fine workmanship and durable.
