Showing 853–864 of 4073 results
Shop
Ai Thinker NodeMCU-32S-ESP32 Development Board
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Ai Thinker TB-04 Bluetooth module
- 1.1mm spacing SMD-20 package
- 6 PWM output
- Antenna patch pad, reserved antenna hole can be directly inserted spring antenna
- Brightness (duty cycle) adjustment range 5-100%
- Factory default warm and cool color duty cycle 50% each
- PMW output frequency 1 KHz
- With small night light function
- With wall switch switching color temperature function
Ai Thinker VC-01 module
Ai-Thinker Ca-01 4G Cat.1 LTE Module
- Module: Ca01
- Communication standard: 4G
- Applicable frequency band: LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41
- General characteristics: 3GPP E-UTRA Release 13
- bandwidth:1.4/3/5/10/15/20MHz
- Normal working temperature: -35 ° C ~ + 70 ° C
Ai-Thinker EC-01G NB-IOT Module
- Processor: Cortex-M3,support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 19.2*18.8*2.8(±0.2)MM
Ai-Thinker PB-03 BLE 5.2 Module
- 1.1 mm spacing SMD-20 package
- 6 channels PWM output
- The antenna adopts half-hole pad mode, which can lead to the main board.
- With the reservation of antenna holes, for inserted the spring antenna directly
- Brightness (duty cycle) adjustment range 5%-100%
- Factory default cool and warm color 50%
- PWM output frequency 1KHz
- Features with Nightlight
- Switching Color Temperature with Wall Switch
Ai-Thinker TG-12F Wi-Fi + BLE 5.0 Module
- Model ESP32-C3F/ ESP-C3-12F
- Package/Case SMD22
- Data Rate: up to 150Mbps
- Supply voltage: 3.6V
- Current: >500mA
Alarm Finder Tracer Buzzer for RC Lost Aircraft
4–6 V is the operating voltage.
Drain Current: 1 to 35 mA.
4.5 grams in weight.
When you lose contact with your remote control aircraft, let you know where it is.
Very helpful when the multirotor loses control.
Installing the alarm is simple; just link it between the servo and the receiver.
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
The same renowned high-temperature performance for high-temperature printing is present in this fully assembled Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle. It also has enhanced capabilities for printing soft and flexible filaments. Thermistor, heater block, 0.2 mm nozzle, sleeving, and cooling fan with holder are all included in this kit.
All Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs
Glue Sticks can be used for various everyday gluing projects, also used in electronics projects for various applications. These glue sticks can be used in all hot melt Glue Guns that have a working temperature around 200 °C and accept sticks with 11 mm diameters.
- Diameter: 11mm
- Length: 190mm
Alligator (Crocodile) Clip Red+Black 6-pair-(12Pcs)
- 50 mm in length
- Weight: 8 g each
- Shade: Red and Black
- Silicon is an insulating material.
Alligator Clips Electrical DIY Test Leads 10pcs of Double-ended Crocodile Clips Roach Clip
- Colour: Black, White, Yellow, Green, and so forth.
- 45 cm is the length of the cable.
- 82 grammes is the net weight.
- When it comes to joining components to wires, they are quite helpful.
- The clips are wrapped in insulation and are attached to the wire on both ends.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance