Showing 865–876 of 2389 results
Shop
DSP PLL 87-108Mhz Stereo FM Transmitter Module Digital LCD Display Wireless Microphone Board Multi-function Frequency Modulation
- Output power: 500mW (drive headphones), 3W (drive speakers)
- Frequency range: 50Hz-18KHz
- Close campus radio 87.0MHz-108.0MHz
- Open campus radio 76.0MHz-108.0MHz
- Equivalent noise: ≥30dB
- Channel: speaker (mono), headphone (stereo)
- Maximum volume 400mA
DType Big 4Pin to 6Pin Power Lines About 15CM
- Product: Large D-type Power Lines with 4 to 6 Pins
- Power cord is the connecting wire.
- Copper is the wire material.
- Use to link computers and graphic cards: Power cable
- Shade: Black
Dual Display 10A Power Adjustable Step-Down Constant-Voltage Constant-Current Power Module (With Case)
- Voltage input: DC 10V–32V
- Voltage of Output: DC 10V–60V
- Maximum Input Current: 16A
- Range of Operation Temperature: -40 to 85 degrees
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- Four-level LED light display power, intelligent automated shutdown when not in use.
- Two USB ports for output.
- MicroUSB port for input (Andro).
- USB output port available.
- 5V1A / 5V2A are the output parameters.
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
Dual USB Output 9V / 12V / 24V / 36V Car Charger Switch 5V DC-DC Power Supply Module 3A Buck Regulator
- Input : 6V-40V
- Output : 5V / 3A (MAX)
- Efficiency : 92% (MAX)
- Switching frequency : 150KHZ
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
Dual USB Output 9V/12V/24V to 5V 3A DC-DC Car Charging Voltage-Stabilizer Module
- Range of input voltage: 6-26V
- 5.2V is the output voltage (take into account the loss in the charge line; the load side is approximately 5V).
- Output current: 3A (the stable output current is 2A in the absence of a heat sink device).
- Two devices can be charged simultaneously using two output ports.
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
DURATOOL 0.1g to 2kg Compact Weighing Scale
- Digital pocket scales with transparent, hinged cover.
- Display 5 digits, illuminated
- Overload protection
- Tare and counting functions
- Auto shutdown
DYS D2826 2200KV Outrunner Brushless Drone Motor (Original)
- Model: D2826-6
- Voltage: 7.2v~11.1v / 2~3s Lipo
- Kv: 2200 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 342W
- ESC: 40A
- Screw Size: M3
DYS D2826-10 1400KV Outrunner Brushless Drone Motor (Original)
- Model: D2826-10
- Voltage: 7.2v~11.1v / 2~3s Lipo
- Kv: 1400 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 205W
- ESC: 40A
- Screw Size: M3
DYS D3536-9 910 KV BLDC Motor
- Battery: 2~4 Cell /7.4~14.8V
- RPM: 910kv
- Max current: 25.5A
- No load current: 1.5A
- Max power: 370W
- Internal resistance: 0.063 ohm
- Weight: 102g (including connectors)
- Diameter of shaft: 5mm
- Dimensions: 35x36m
- Prop size: 7.4V/12×5 14.8V/10×7
- Max thrust: 1050g
Load more products
Loading...