Showing 949–960 of 4073 results
Shop
Arduino Nano 33 Ble Sense with Header-Rev 2 ABX00070
- Processor: nRF52840 (datasheet)
- Security: ECC608 crypto chip
- Flash: 1MB
- RAM: 256KB
- Circuit voltage 3.3V
Arduino Nano 33 BLE with Headers
| Micro Controller Chip | NINA- b3 (nRF52840) |
| Connectivity | BLE |
| Operating Voltage | 3.3V |
| Input Voltage (via USB) | 5V |
| Maximum Voltage Limit | 21V |
| Clock Speed | 64 MHz |
| CPU Flash Memory | 1MB |
| SRAM | 256 KB |
| Digital Input | 14 Pins |
| Analog Input | 8 Pins |
| PWM Pins | All Digital Pins |
| Interfaces | USB, SPI, I2C, I2S, UART |
Arduino Nano RP2040 Connect with Header ABX00053
- 133MHz 32bit Dual Core Arm Cortex-M0+ Processor
- 264kB on-chip SRAM
- U-Blox Nina W102 WiFi/Bluetooth Module
- 240MHz 32bit Dual Core Xtensa LX6
- 520kB on-chip SRAM
Arduino NANO V3.0 Development Board – Clone Compatible Model
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino Nicla Sense ME
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Arduino Nicla Sense ME ABX00050
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Arduino Nicla Vision
- STMicroelectronics STM32H747AII6 Dual ARM® Cortex® – M7 core up to 480 Mhz + M4 core up to 240 Mhz
- Memory: 2MB Flash / 1MB RAM,16MB QSPI Flash for storage
- Interface: USB interface with debug functionality
- Wi-Fi and Bluetooth® Low Energy connectivity
- Supports Micro Python
Arduino Pro Mini – ATMEGA 328P – 5V 16Mhz – Arduino Compatible
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
Arduino Starter Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by ibots.in
- All-in-one kit, a great starter kit for learning to code.
Arduino Starter Kit with 170 Pages Project Book
Get started with electronics quickly and easily without any prior experience because with this kit you will get an Official Arduino pictorial Project book
Arduino Uno Mini Limited Edition ABX00062
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by ibots.in
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
Load more products
Loading...