Arduino Nano 33 BLE with Headers
Original price was: ₹2,700.00.₹2,400.00Current price is: ₹2,400.00.| Micro Controller Chip | NINA- b3 (nRF52840) |
| Connectivity | BLE |
| Operating Voltage | 3.3V |
| Input Voltage (via USB) | 5V |
| Maximum Voltage Limit | 21V |
| Clock Speed | 64 MHz |
| CPU Flash Memory | 1MB |
| SRAM | 256 KB |
| Digital Input | 14 Pins |
| Analog Input | 8 Pins |
| PWM Pins | All Digital Pins |
| Interfaces | USB, SPI, I2C, I2S, UART |
Arduino UNO R3 Development Board – Clone Model – High Quality
Original price was: ₹650.00.₹575.00Current price is: ₹575.00.- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
Arduino Uno R3 with Cable
Original price was: ₹700.00.₹620.00Current price is: ₹620.00.- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6. FOR BULK B2B ENQUIRIES MAIL US @ibots.in
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
Original price was: ₹1,450.00.₹1,250.00Current price is: ₹1,250.00.- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
ESP WROOM 32 MCU Module
Original price was: ₹490.00.₹450.00Current price is: ₹450.00.- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
ESP32 38-Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP-32 ESP-32S ESP 32 Similar ESP8266 – RS4914
Original price was: ₹349.00.₹339.00Current price is: ₹339.00.
ESP8266 NodeMCU CP2102 Board
Original price was: ₹450.00.₹385.00Current price is: ₹385.00.- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
L293D Motor Driver shield for Arduino
Original price was: ₹210.00.₹175.00Current price is: ₹175.00.- This motor driver shield can use up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- It features a big terminal block connectors to easily hook up wires (10-22AWG) and power
- Tested compatible with Mega board, Diecimila & Duemilanove board compatible with arduino.
- Uses Up to 4 bi-directional DC motors with individual 8-bit speed selection.
L293D Motor Driver/Servo Shield for Arduino
Original price was: ₹250.00.₹175.00Current price is: ₹175.00.- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Mega 2560 ATmega2560-16AU Board plus USB Cable compatible with Arduino
Original price was: ₹1,600.00.₹1,400.00Current price is: ₹1,400.00.- 54 Digital I/O terminals (14 of which have programmable PWM outputs).
- 16 Analog Inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
Original price was: ₹1,550.00.₹1,350.00Current price is: ₹1,350.00.- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
Original price was: ₹470.00.₹350.00Current price is: ₹350.00.- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
