Showing 1–12 of 295 results
Electronic Components
0.01 Ohm 3W SMD2512 Surface Mount Sense Resistor (Pack of 3)
- 0.01 Ω of resistance
- SMD2512 is the package number.
- 3 W of power
- Three resistors in a pack
0.5W 8OHM Trumpet, Diameter 36mm
- Measurement in diameter: 36 mm
- Power rating: 0.5 (W)
- Impedance rated: 8Ω (Ω)
- Response frequency: 45 kHz
- Ratio of noise: 92 ± 3 (dB)
1 Ohm 1/4W 1206 Surface Mount Chip Resistor (Pack of 100)
- 1 Ω of resistance.
- One percent tolerance.
- 500V is the dielectric’s withstanding voltage.
- chip resistor mounted on the surface.
1.5F – 5.5V – Super Capacitor
- 5F capacitor
- 5V of voltage
- Installing: SMD
- Content: Tantalum
- -20 to 80% tolerance
1.5mm Blue Surface Mount LED (Pack of 50)
- Minimal power use
- Broad angle of view
- Perfect for indicator and backlight
1×40 Berg Strip Male Connector
- Number of Pins: 40
- Pin Spacing(pitch): 2.54 mm
- Length of the Strip: 103 mm
- Pin height: 6 mm
- Square Posts.
- Stackable – End to End and Side to side.
- Can be manually broken for the length needed.
- Standoffs allow cleaning of solder contaminants.
1×40 Pin 2.54mm Straight Long Female Strip Connector (Pack of 5)
- Pin Header Connector.
- Type of connector: female pin strips
- There are 40Â pins in total.
- Pin Measurement: 12 mm in length.
- 54 mm is the pitch.
100 uF 25V Surface Mount Electrolytic Capacitor (Pack of 20)
- 100 uF of capacitance
- 25V is the voltage.
- Type: Electrolytic SMD
- 20-piece pack
- Dimensions of each capacitor: 7.1 x 6.5 x 7.75 mm
100 uF 63V Through Hole Electrolytic Capacitor (Pack of 30)
100 uF of capacitance
63V of voltage
Electrolytic through-hole
Temperature range of operation: -40°C to 125°C
thirty pieces in a pack
Dimensions of each capacitor: 8 x 12 x 37 mm
100nF 0805 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
- 100 nF of capacitance
- 50V of voltage
- Type of mounting: SMD/SMT
- Temperature range of operation: -55°C to 125°C
- Provided on a reel of tape
- Nickel-barrier end termination
- RoHS-compliant; Halogen Free
100Pcs. 1/4W Metal Film Resistors Assortment for DIY Electronic Projects and Experiments
- This is a wonderful collection for front ends and low power applications, featuring five colour bands and a 1/4W 1% tolerance metal film resistor.
- These resistors are standard axial-lead metal film resistors, which are generally better for high frequency or radio frequency applications and have far greater temperature stability than their carbon equivalents. They also have lower noise.
- Every bundle is bundled in an easily tearing strip and labelled with the resistance value, making your work easier.
100pF 50V Ceramic CapacitorDIP (pack of 50)
- 100pF of capacitance
- 50V of voltage
- Mounting: Via the opening
- Tolerance: +/- 10%
- Composition: Ceramic
Load more products
Loading...







Motors