Motors
Showing 109–120 of 516 results
5MP Rpi 3/4 B camera module with cable
Original price was: ₹550.00.₹450.00Current price is: ₹450.00.- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
5V 1 Channel Relay Module
Original price was: ₹50.00.₹46.00Current price is: ₹46.00.- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- Power supply indicator lamp
- Control indicator lamp
- Triode drive, increasing relay coil
5V 1A Single Pin DC Adapter
Original price was: ₹150.00.₹135.00Current price is: ₹135.00.- Input – 100-240 VAC 50/60Hz
- Output Type – DC
- Output – 5Volts 1Amp
5V 2 channel USB PC Intelligent Control Relay Module
Original price was: ₹450.00.₹440.00Current price is: ₹440.00.- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
5V Active Electromagnetic Buzzer
Original price was: ₹20.00.₹15.00Current price is: ₹15.00.- Input Voltage(Max.) : 5V
- Resonance Frequency: 2048 Hz
- Sound pressure(dB(A)/10cm)min.: 80
- Body Size : 12 x 9.5mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
5V Dual Channel Relay Module with Optocoupler
Original price was: ₹125.00.₹90.00Current price is: ₹90.00.- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
5V Mini Fan for Raspberry Pi
Original price was: ₹110.00.₹99.00Current price is: ₹99.00.- Raspberry PI dedicated cooling fan, Ultra-quiet, Large air flow , low noise , high performance cooling suitable for all models of Raspberry Pi 3,PI B/2, PI B and PI 1.
- his fan is suitable for use on any machine that requires heat dissipation and can be equipped with a fan.
- Can be used alone 3.3V or 5V power supply, current 0.2A, two kinds of interface lines, stable work.
- Fan Size 30mmx30mmx10mm, Noise 18dB , Weight 18g, cable length 6cm, convenient for DIY
- It comes with 2 pin Connector.
5V Passive Buzzer-10 Pcs.
Original price was: ₹105.00.₹67.00Current price is: ₹67.00.- Maximum Input Voltage: 5V
- 42 Ω of resistance
- Rate of Resonance: 2048 hertz
- Size of Body: 12 x 8 mm
- Pin Diameter: 6 mm
- External Colour: Black
- Material: Plastic
5V Relay Module with USB Control 1 Channel Module
Original price was: ₹799.00.₹449.00Current price is: ₹449.00.Features :
- The onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is in the closed state, the red disconnect
- Military-grade PCB board production.
- Use genuine pine music relay
- Support Windows 7, XP 32-bit systems
6.8k Ohm 1W Metal Film Resistor (Pack of 40)
Original price was: ₹85.00.₹49.00Current price is: ₹49.00.- Maximum resistance of 6.8k Ohm.
- 500 V is the working voltage.
- Tolerance: 1%
- 50 PPM/°C is the temperature coefficient of resistance.
- Temperature Range for Operation: -40°C to 125°C
615 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
Original price was: ₹999.00.₹702.00Current price is: ₹702.00.- Model: 615
- Shaft Size: 0.8 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 65 or 55 mm
- Prop. Material: Glass Fiber
628ZZ Bearing 8x24x8 Stainless Steel Shielded Miniature Bearings (4Pcs)
- Model: 628ZZ
- ID (inner diameter): 8mm.
- OD (outer diameter): 24mm.
- Thickness: 8mm.
- Weight: 66 gm(16 gm Each).
