Showing 109–120 of 524 results
Shop
5A range Current Sensor Module ACS712
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
5mm LDR (Pack of 10)
- 5 mm in diameter
- Two pins in total.
- Mounting Type: PCB Through Hole
- The maximum operating temperature is around +800°C.
- Resistance to dark: 1–20 M ohm
5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
Features :
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi Zero W.
-
Directly plug into Raspberry Pi Board (besides HDMI port)
- Small and lightweight camera module.
- Plug-n-Play camera for Raspberry Pi Zero W.
Package Includes :
5MP Rpi 3/4 B camera module with cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
5V 1 Channel Relay Module
- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- Power supply indicator lamp
- Control indicator lamp
- Triode drive, increasing relay coil
5V 1A Single Pin DC Adapter
- Input – 100-240 VAC 50/60Hz
- Output Type – DC
- Output – 5Volts 1Amp
5V 2 channel USB PC Intelligent Control Relay Module
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
5V Active Electromagnetic Buzzer
- Input Voltage(Max.) : 5V
- Resonance Frequency: 2048 Hz
- Sound pressure(dB(A)/10cm)min.: 80
- Body Size : 12 x 9.5mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
5V Dual Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
5V Mini Fan for Raspberry Pi
- Raspberry PI dedicated cooling fan, Ultra-quiet, Large air flow , low noise , high performance cooling suitable for all models of Raspberry Pi 3,PI B/2, PI B and PI 1.
- his fan is suitable for use on any machine that requires heat dissipation and can be equipped with a fan.
- Can be used alone 3.3V or 5V power supply, current 0.2A, two kinds of interface lines, stable work.
- Fan Size 30mmx30mmx10mm, Noise 18dB , Weight 18g, cable length 6cm, convenient for DIY
- It comes with 2 pin Connector.
5V Passive Buzzer-10 Pcs.
- Maximum Input Voltage: 5V
- 42 Ω of resistance
- Rate of Resonance: 2048 hertz
- Size of Body: 12 x 8 mm
- Pin Diameter: 6 mm
- External Colour: Black
- Material: Plastic
5V Relay Module with USB Control 1 Channel Module
Features :
- The onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is in the closed state, the red disconnect
- Military-grade PCB board production.
- Use genuine pine music relay
- Support Windows 7, XP 32-bit systems
Load more products
Loading...