Showing 1381–1392 of 2373 results
Shop
MC-38 Wired Magnetic Sensor
- Actuation Distance : 15 – 25 mm;
- Connecting cable length: 30 cm.
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartment, hotel, office, etc.
MC000764-COPPER TUBULAR LUG, 6.5mm, 6AW
- Content: SS
- Dimensions: 1.5 mm
- Fully annealed is the final metal state.
- SS Grade: 202
- Chrome polish
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
MC000772-COPPER TUBULAR LUG,5.3MM, 12-1
- Finalisation: Crimp
- Wire Size AWG Maximum: 10AWG
- CSA for Conductor Area: 6 mm²
- Type of Terminal: Compression Lug
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
MC34063API PDIP-8 Switching Buck Voltage Regulators (Pack of 2 ICs)
- Variable output voltage between 1.25 and 40 volts
- broad range of input voltages (3V to 40V)
- Up to 1.5A of high output switch current
- Frequency oscillator up to 100 KHz
- There is a 2% internal accuracy reference.
- Current limitation for short circuits
- Operating temperature range: 0°C to 70°C; low standby current
MC34151 High Speed Dual MOSFET Driver IC DIP-8 Package
- IC Name: MC34151
- Package/Case: DIP-8
MCP23017-E/SO MICROCHIP I/O Expander, 16 bit, I2C, Serial, 1.8 V, 5.5 V, SOIC, 28 Pins
- Chip Setup: 16-Bit
- Bit Count: 16 bits
- Frequency of Bus: 1.7MHz
- Interfaces: Serial IC and I2C Interface Type: Serial Supply Voltage Minimum: 1.8V, I2C Interface
- Maximum Supply Voltage: 5.5V
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
- Support CAN V2.0B technical standard, communication rate 1Mb / S.
- Module 5V DC power supply, SPI interface protocol control
- 0 to 8 bytes long data field.
- 8MHZ crystal oscillator
- 120Ω terminal resistance
- Use High-speed CAN transceiver TJA1050
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
MCP6004T-I/ST – 6V 1MHz Low-Power Operational Amplifier 14-Pin TSSOP Microchip Technology
- IC Name: MCP6004T-I/ST
- Package/Case: SMD-14
MCU-758 ACS758LCB-050B- PFF-T Hall Current Sensor Module
- Working voltage: 3V-5V (MAN SV)
- Static output voltage: VCCi2
- Working current: 135m2A (MAX)
- Small in size, with easy mounting capability.
- Monolithic Hall IC for high reliability FOR BULK B2B ENQUIRIES MAIL US @ibots.in
MCU-Micro USB Breadboard 5V Power Supply Module
- USB Micro Female Interface: USB OTG Connector Type
- Dimensions: 15 x 13 mm
- Breakthrough Indications Pin spacing is 2.54 mm / 0.1 inch.
- Mounting Holes: In agreement
- PCB Shade: Blue
MD13S 13Amp DC Motor Driver – GROVE Compatible
-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Load more products
Loading...