Showing 1705–1716 of 2404 results
Shop
POWER ESATA TO, ESATA+USB Ddapter
Package Includes:
1 x POWER ESATA TO, ESATA+USB Adapter
Pro DVR Mini Audio-Video Recorder for FPV RC Multicopters
Video Format: PAL/NTSC
Frequency of Light: 50 Hz/60 Hz
JPEG compression format
Frame Rate of Record: 30 Frames
Max Support: 32G TF Card; VGA (640 x 480 pixels); D1 (720 x 480 pixels); HD (1280 x 480 pixels)
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
Pro Mini ATMEGA328P 5V/16M (Official Version)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download
Pro Mini ATMEGA328P 5V/16M Black- Standard version
- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
Programmer Testing Clip SOP8 SOP16 SOP SOIC 8 SOIC 16 SOIC8 SOIC16 SOIC8 DIP16 DIP 8 Pin DIP 16 Pin IC Test Clamp Without Cable
- Connector type: Test Clip
- Pin format: SOIC / SOP
- Color: Black
- Material: Plastic
Proto Screw Shield 1.0 For Arduino Uno
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
Prototype Shield V3.0 For Arduino Mega with breadboard
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Prusa i3 RAMPS 1.4 Mega2560 Lcd12864 DRV8825 3D Printer All Electronic Components Kit
- USB type B connector.
- Available as an SD Card add-on.
- Fits driver board for five Pololu steppers.
- When the heater is turned on, LEDs show it.
- scalable to accommodate more accessories.
- Bed control with an extra 11A fuse for heating.
- Two motors can be connected to Z for the Prusa Mendel.
- There are still I2C and SPI pins accessible for future growth.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
PT100-S Waterproof 1m 30mm Stainless Steel Probe Temperature Sensor
- Number of model: FTARP05 series
- Polish rod probe mounting form
- Material of the probe: stainless steel
- Diameter of the probe: 4 mm
- The probe’s length is 30mm.
- Material of the collar: PTFE, silver-plated copper (not insulated), Copper with a silver plating (insulated, waterproof)
- Reliability ±(0.3°C+0.5%|t|)
- Time of thermal response: <0.5 seconds
PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
- Model number: FTARP05 series.
- Mounting form Polish rod probe
- The Probe material: Stainless steel.
- Probe diameter: 4mm.
- Length of the probe: 30mm.
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
- Accuracy ±(0.3°C+0.5%|t|).
- Thermal response time: <0.5 sec.
PTV111-3220A-B103-Rotary Potentiometer
- Resistance of Track: 10 kohm
- Number of Turns: One
- Linear Track Taper
- 50mW of power
- Tolerance to Resistance: +/- 20%
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...