Showing 1741–1752 of 2373 results
Shop
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
RAMPS 1.4 3D PRINTER CONTROLLER+Mega2560 with Cable compatible with Arduino +5Pcs 4988 Driver With Heat Sink+LCD 128×64 Display Kit
RAMPS 1.4 3D Printer controller+Mega2560 with cable compatible with Arduino +5Pcs A4988 Driver with heat sink Kit
- USB type B connector.
- Available as an SD Card add-on.
- Fits driver board for five Pololu steppers.
- When the heater is turned on, LEDs show it.
- Scalable to accommodate more accessories.
- Bed control with an extra 11A fuse for heating.
Raspberry Pi – Power supply, 48W, DC jack, EU plug, white
Output voltage: 8 V DC
• rated load current: 6 A
• maximum power: 48 W
• short circuit protection
• overcurrent protection
• overvoltage protection
• efficiency: >88 %
• Output cable: 1.5 m (16AWG)
• Output connector: DC hollow plug (5.5×2.1×11 mm)
• Operating ambient temperature: 0 .. 40 °C
Raspberry Pi 15W Official Black Power Supply (EU)
- 5.1V / 3.0A DC output
- 1.5m 18AWG captive cable with USB-C output connector
- It has low power consumption on stand by mode
- It is compatible with Raspberry Pi 4 devices.
- it protects the device from short circuits and overloading
Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
- RAM: 1GB
- Processor: Broadcom BCM2837 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- Storage : SD/MMC/SDIO
- Power: 5V / 700mA~3A via micro USB
Raspberry Pi 3 Heat Sink set
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
Raspberry Pi 3 in 1 Heat Sink Aluminium for Raspberry Pi 4B (Gold) – Pack of 1
- The heat sinks have short profiles that are enough to fit within standard Raspberry Pi cases.
- The aluminum heatsinks work well to dissipate excess heat.
- Easy to apply, come with self-adhesive.
- Includes one large and two small heat sinks.Easy to apply heatsinks for a Raspberry Pi board
Raspberry Pi 3 Model A+ with Official Raspberry Pi Case
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- ABS plastic official case (Red-white)
Raspberry PI 3 Model B+ Basic Kit
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
- HDMI (rev 1.3 and 1.4) Composite RCA (PAL & NTSC) Video Out.
- 3.5 MM Jack, HDMI Audio Out.
- MMC, SD, SDIO Card slot onboard storage.
- Ethernet speed: 300MBPS
Raspberry Pi 3 Model B+ BCM2837B0 SoC, IoT, PoE Enabled
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps)
- Extended 40-pin GPIO header, Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port, DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
Raspberry Pi 4 Aluminium Heat Sink Set of 4
- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B
- Material: aluminum
- Color: Black
Load more products
Loading...