Showing 1981–1992 of 4073 results
GSM Antenna SMA 5cm 900M 1800mhz
Original price was: ₹49.00.₹39.00Current price is: ₹39.00.- Product: GSM Antenna
- Color: Black
- SMA male straight 5cm 900-1800MHz radio antenna.
- Frequency: 900MHz – 1800MHz
- Maximum Power: 50W
- Length: 5cm/1.97 inch
GSM GPRS SIM808 Module SMS Chip Development Board
Original price was: ₹2,000.00.₹1,750.00Current price is: ₹1,750.00.- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- GPRS mobile station class B
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Supports charging control for Li-Ion battery
- Supports Real-Time Clock
- Integrated GPS/CNSS and supports A-GPS
- Low power consumption, 10mA in sleep mode
GSM SIM800C Modem with Antenna
Original price was: ₹1,236.00.₹1,099.00Current price is: ₹1,099.00.- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32
GT2 Aluminum Pulley (Without 20 teeth) 5mm Bore for 6mm Belt – 2Pcs
Original price was: ₹220.00.₹179.00Current price is: ₹179.00.- Aluminium is the material.
- 18 mm is the outside diameter.
- Diameter inside: 5 mm.
- 8.5 mm in length.
- 6 grammes in weight.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2 Close-Loop 158mm Long & 6mm-Width Rubber Timing Belt for 3D Printer
Original price was: ₹165.00.₹108.00Current price is: ₹108.00.- Pitch: 2 mm
- Width: 6mm; Material: Neoprene Rubber with Fibreglass Core
- Length overall: 158 mm
- Height of belt: 1.52 mm
- Height of tooth: 0.76 mm
- Form: Condensed Loop
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
Original price was: ₹99.00.₹64.00Current price is: ₹64.00.- Pitch: 2 mm
- Material: Fibreglass with Neoprene Rubber Core Dimensions: 6 mm
- 200 mm in total length
- Number of Teeth: 100
GT2 Timing Belt 280mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
Original price was: ₹88.00.₹55.00Current price is: ₹55.00.- Pitch: 2 mm
- Width: 6mm; Material: Neoprene Rubber with Fibreglass Core
- Length overall: 280 mm
- Height of belt: 1.52 mm
- Height of tooth: 0.76 mm
GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
Original price was: ₹208.00.₹139.00Current price is: ₹139.00.- Pitch: 2 mm
- Width: 6mm; Material: Neoprene Rubber with Fibreglass Core
- 400 mm in total length
- Height of belt: 1.52 mm
- Height of tooth: 0.76 mm
- Form: Enclosed Ring
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2-6mm Belt Width 36 Teeth 8mm Bore Timing Pulley
Original price was: ₹252.00.₹179.00Current price is: ₹179.00.- 8 mm is the inner diameter.
- Superior Grade Aluminium
- Outstandingly Worked
- Robust and useful
- Reduces the possibility of the belt slipping
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2205 2300KV Brushless DC Motor – Black Cap (CW Motor Rotation)
Original price was: ₹899.00.₹814.00Current price is: ₹814.00.- KV: 2300
- Shaft diameter: 5.0mm
- Maximum Power: 495 W
- Li-PO Batteries: 3-4 S
- ESC: 40-60A
- Propellers: 5
GT2205 2300KV Brushless DC Motor ? Silver Cap (CCW Motor Rotation)
Original price was: ₹1,109.00.₹920.00Current price is: ₹920.00.KV: 2300
Diameter of shaft: 5.0 mm
Maximum Power: 495 W
Li-PO Capacitors: 3–4 S
ESC: 40–60A
Five propellers
Note:
Within India, 3 – 4 days lead time with 100% advance
For imports, 15 days lead time with 50% advance
GT521F32 Optical Fingerprint Scanner Module with JST SH Connector
Original price was: ₹3,499.00.₹2,399.00Current price is: ₹2,399.00.Features :
- Ultra-thin Optical Sensor.
- High-accuracy & high-speed fingerprint identification technology.
- Works well with dry, moist or rough fingerprints.
- 200 fingerprints storage.
- Wake up on Finger Function.
- Easy one-touch enrollment.
- 1: 1 verification, 1: N identification.
- Simple UART & USB communication protocol.
- external UART-to-USB converter required (TX & RX levels: 3.3V).
- Complies with USB 2.0 full-speed (12 Mbps) specifications.
- Reading & writing fingerprint template(s) (i.e. processed data) from/to the device.
- Downloading the raw bitmap image from the device (catalog fingerprints).
