Showing 205–216 of 516 results
Shop
Diffused RGB Common Anode LED – 10mm Tricolor (5pcs)
- Diameter of 10 mm
- Green: 523 nm, Blue: 467 nm, and Red: 623 nm in wavelength
- At a current of 20 milliamperes, forward voltage: Green: 3.0-3.4V, Blue: 3.0-3.4V, and Red: 1.8-2.2V
- A 50-degree angle of view
Digital LDR Module – 4Pin
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
Digital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
- Dimensions (LxWxH): 12.5 x 7 x 2 cm
- Probe Length: around 2 feet (60 cm)
- Weight: 160 grammes
- Shade: Yellow
- LCD 15 millimetres high.
Digital Temperature Module For Arduino AVR PIC DIY Maker
- Power supply: 3 – 5V
- Good sensitivity
- The output format: Digital switching output (0 and 1)
- The comparator output signal is clean, good waveform, driving ability, more than 15mA.
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
DJI 2212 920KV Brushless DC Motor for Drone with Black Cap (CW Motor Rotation)
Specifications :-
| Model | 2212 |
| Motor KV (RPM/V) | 920 |
| Maximum Thrust (gm) | 500 |
| Compatible Li-PO Batteries | 3S ~ 4S |
| Shaft Diameter (mm) | 6 |
| Rated Voltage(V) | 7 ~ 12 |
| Required ESC (A) | 30 |
| Length (mm) | 28 |
| Width (mm) | 28 |
| Height (mm) | 46 |
| Weight (gm) | 60 |
DN32 Water Flow Sensor Flowmeter 3.5-24V 1.25” 1- 120L/Min
- Material: ABS, Metal
- Operating Volatge: 3.5 to 24V
- Measuring range: 1-120L/min
- Water Pressure: ≤2.0MPa
- Interface: 32mm/1.26in FOR BULK B2B ENQUIRIES MAIL UA @ibots.in
Doat: Breadboard – WB-102 – Original [High Quality]
- Quick circuit testing and mock-up
-
840 Contact Points
-
Suitable for most IC’s, Standard 0.1″ Spacing
-
Positive and Negative Power Rails on Top and Bottom
DPDT Slide Switch 6 Pin
- Length: 25mm
- Width: 6mm
- Terminal Pitch: 4mm
- Voltage: 50V
- Current: 0.5A
Drone remote control joystick
- Material: Aluminum alloy
- Applicable models: for Mavic Air/Mavic Mini/, Mavic 2 Pro Zoom.
- Colour: Black, Red
- Net weight: 3.6g (1 pair)
- Product size: 2*1cm (single)
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
DRV8833 2 Channel DC Motor Driver
- One bipolar stepper motor or two DC motors can be driven by a dual-H-bridge motor driver.
- Voltage range for operation: 2.7 V to 10.8 V
- Output current for each motor is 1.2 A constant (2 A peak).
- There are 3V and 5V compatible inputs.
DS1302 Real Time Clock (RTC) Module without battery
Specifications
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
Load more products
Loading...







Motors