Showing 2185–2196 of 4062 results
Shop
IMAX B6 80W 6A Charger/Discharger 1-6 Cells + DC 5A 12V 60W ADAPTER AC
- Voltage input: 11–18 v.
- Circuit Power: Maximum 50W of charge and 5W of discharge.
- Range of Charge Current: 0.1~5.0A.
- Range of Discharge Current: 0.1-1.0A.
- 1–15 NiMH/NiCd cells.
- Lithium/polymer cells: 1–6.
IMAX B6AC Charger/Discharger 1-6 Cells (Copy)
- DC input of 12V or AC 100–240v
- A fitting fuse is included with the cables.
- Microprocessor-driven
- Capable of Li-ion, LiPo, and LiFe
- Monitoring of input voltage. (Preserves automobile batteries in the field)
- Battery cycling and break-in functionality
- Data storage (memory can hold up to 5 packs)
- Checker for internal resistance to assess pack health
- Sensitivity of delta-peak
- Balance of each individual cell
Impact Switch Collision Switch Sensor Module for Arduino
- Vibration Sensors, Type
- Switching Transducer as the Output
- Dimensions: LxWxH = 25 x 14 x 6 mm
- Weight: 3 gramme
- Right Now: 2 A
- Rated Voltage: 125 VAC
INFINEON CY8CKIT-059
- Supports PSoC Creator
- Micro-USB header for creating prototypes with full speed USB 2.0 connectivity
- Cypress’s KitProg programmer and debugger
- Supports bridging over USB-UART and USB-I²C interfaces
- Provides access to Micrium μC/Probe to read and write memory on target device
Infrared IR Sensor Receiver Module for Arduino
- Measurements: 2.5 by 1.5 by 1.5 cm.
- 90° is the receiving angle.
- Operating voltage: 2.7 to 5.5 V.
- 37.9 kHz is the frequency.
- Range of reception: 18 m.
- 4 grams in weight.
Infrared IR Wireless Remote Control Module Kit for Arduino
- Battery: CR2025 160mAh button battery
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Effective life: 20,000 times
- Static current: 3uA – 5uA
- Dynamic current: 3mA – 5mA
Infrared Obstacle Avoidance IR Sensor Module (Active Low)
- Distance of detection: 2 to 30 cm
- Angle of detection: 35 degrees
- Chip for comparison: LM393
- 3 mm screw holes for simple installation
Infrared Obstacle Avoidance Sensor Module
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-tu
Infrared Receiver LED IR Diode LED- (Pack of 5)
- 5 mm in diameter
- Dissipation of power Pd(mW): 100
- Voltage in reverse: 5V
- Voltage Forward: 1.2 V–1.3 V
- Range of Operation: -40°C to +100°C
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
- Digital I2S interface with high precision 24-bit data
- High signal to noise ratio is 61 dBA
- High sensitivity – 26 dBFS
- Stable frequency response from 60 Hz to 15 kHz
- Low power consumption: low current consumption 1.4 mA
- High PSR: -75 dBFS
Insulation Cotton Washer for TEC1- 12706 Thermoelectric Cooler Peltier-5pcs
- Beneficial For: Peltier Thermoelectric Cooler TEC1-12706.
- Length: 69 millimetres.
- Measurement of width (mm): 69.
- Measured in millimetres: 4.
- Two grams (each) in weight.
Intel Movidius Neural Compute Stick 2
Intel Corporation introduces the Intel Neural Compute Stick 2 on Nov. 14, 2018, at Intel AI Devcon in Beijing. Designed to build smarter AI algorithms and for prototyping computer vision at the network edge, the Intel Neural Compute Stick 2 enables deep neural network testing, tuning and prototyping, so developers can go from prototyping into production. (Credit: Intel Corporation)
Load more products
Loading...