Showing 2317–2328 of 2404 results
Shop
Waveshare RS232 RS485 to RJ45 Ethernet Serial Server, RS232 And RS485 Dual Channels Independent Operation, Dual Ethernet Ports, common netowrk port
- Product Type: Modbus Gateway, MQTT Gateway, Serial Server
- 300 to 115200 bps is the baudrate.
- Temperature range for operation: -40 to 85
- Range of humidity: 5 to 95 percent relative humidity
Waveshare RS232 To RS485/422 Active Digital isolated Converter, Onboard Original SP3232EEN and SP485EEN Chips, Options for RS232 DB9 Male port
- Model: Waveshare RS232 To RS485/422 Active Digital isolated Converter, Onboard Original SP3232EEN and SP485EEN Chips, Options for RS232 DB9 Male port.
- Stable transmission at the rate of 300~921600bps.
- Onboard 15KV ESD isolation protection and 600W lightning proof & anti-surge protection.
- Onboard power supply screw terminal, allows 5V~36V DC wide range input.
- Provides seamless communication between RS232 and RS485/422 devices.
Waveshare RS485 CAN HAT for Raspberry Pi
- Voltage required for operation: 3.3V
- CAN device: MCP2515
- SN65HVD230 CAN transceiver; SP3485 485 transceiver
- Size of mounting hole: 3.0 mm
Waveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
- Controller: ESP32-WROOM-32
- Power Supply Port: XT60 connector, 5.5×2.5 mm DC jack
- Power Supply: 9~25V (the input voltage and the servo voltage must be matched)
- Communication Interface: UART, USB Type-C port × 2
- Wireless Communication: 2.4G WiFi
- Mounting Hole Diameter: 3 mm
- Mounting Hole Spacing: 58×49 mm
- PCB Size: 65×57 mm
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
- Model: Waveshare SIM7600G-H 4G HAT
- Supports: Raspberry Pi, LTE Cat-4 4G / 3G / 2G
- Cold starts: 148 dBm
- Power supply: 5V
- Receiver type: 16-channel C/A Code
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
- supports the MPPT (Maximum Power Point Tracking) feature, which increases the solar panel’s efficiency.
- Adaptable battery recharge via USB Type-C power adapter and solar panel
- Compatible with screw terminal or DC-002 jack input, 6V–24V solar panels
- Stylishly finished, heavy-duty aluminium body with several status LEDs
- By taking off the lid, replacing the batteries is simple.
Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band
- SX1262 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
- Voltage supply: 3.3 V to 5 V
- TSL25911FN is the system.
- Interface for communication: I2C
- Fixed interface address 0x29
- Range of measurement: 0 lx to 88000 lx
- Sensitivity: 188 ulx at maximum
- 600M:1 dynamics
- The gadget works with STM32, Arduino, and Raspberry Pi.
Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector
- Resolutions up to 4K for HDMI Ethernet Channel
- Audio Return Channel
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection
- Baud Rate: FT232RNL 300bps ~ 3Mbps
- Device Port: RS485/422
- Host Port: USB Operating voltage: 5V
Waveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
- Host Interface: USB
- Devise interface: UART
- Communication Range: 50bps ~ 6Mbps
- USB Device connector: USB Type-A;
- Protection: self-recovery fuse, ESD protection
- UART interface connector: 6pin right-angle pinheader; 3pin connector
- protection: IO protection diode
Waveshare USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V
The Waveshare USB to UART/I2C/SPI/JTAG Converter is a versatile tool for interfacing various electronic devices with your computer. It supports multiple communication interfaces, including UART (Universal Asynchronous Receiver-Transmitter), I2C (Inter-Integrated Circuit), SPI (Serial Peripheral Interface), and JTAG (Joint Test Action Group). This makes it handy for debugging, programming, and communicating with a wide range of embedded systems and microcontrollers.
Load more products
Loading...