Showing 2365–2376 of 4062 results
Shop
LNK6667 High-Power Off-Line Switcher IC
Package/Case: eSIP-7C
IC Name: LNK6667
Load Cell 300KG Table Top Wide Bar
1) Simple and easy interface to connect to Arduino/Raspberry Pi using HX711 Breakout Board.
2) Precision: 0.02.
3) Ingress protection: IP65 Not to be affected by water sprinkled from any direction in a short period of time.
4) Integral structure and easy to install or calibrate.
Lock Set Extra Long Pin
Most pin tumbler locks are manufactured with rather limited room in the plug chambers. There is enough space for the pins and springs, of course, and some room for the stack to traverse up and down in order to operate
LOCK SET OREVA 3 PIECE
It is long lasting with 2 key 3 lock in box. It gives a reliable performance.It is long lasting with 2 key 3 lock in box. It gives a reliable performance.
LoRa 433MHZ SX1278 SX1276 Wireless Transmitter and Receiver RF Module 8000M E32-433T30D UART
- Model Number: E32-433T30D
- Port Number: 1
- Type: CDMA
- Working Frequency: 433 MHz
- RF connector: SMA-K
- Distance: 8000m
- RF IC: SX1278 SX1276
LoRa 433MHZ SX1278 SX1276 Wireless Transmitter and Receiver RF Module 8000M E32-433T30D1B UART
- Model Number: E32-433T30D1B
- Port Number: 1
- Type: CDMA
- Working Frequency: 433 MHz
- RF connector: SMA-K
- Distance: 8000m
- RF IC: SX1278 SX1276
LoRa 433MHZ SX1278 Wireless Transmitter and Receiver RF Module IoT Transciever CDSENet E32-433T20DT UART
- Model Number: E32-433T20DT
- Port Number: 1
- Type: CDMA
- Working Frequency: 433 MHz
- RF connector: SMA-K
- Distance: 3000m
- RF IC: SX1278
Lora Antenna 433mhz
- Center Frequency: 433 MHz
- Wavelength: ¼-wave
- VSWR: < 2.0 typical at center
- Peak Gain: 3.6dBi
- Impedance: 50-ohms
Lora Antenna 868mhz
- Center Frequency: 868 MHz
- Wavelength: ¼-wave
- VSWR: ≤ 1.9 typical at center
- Peak Gain: 0.6dBi
- Impedance: 50-ohms
Lora Antenna 915mhz
- Center Frequency: 915 MHz
- Wavelength: ¼-wave
- VSWR: ≤ 1.9 typical at center
- Peak Gain: 2.2dBi
- Impedance: 50-ohms
LP-1 High Frequency Response Logic Probe, DTL TTL CMOS Pulse Memory Logic Tester
- This logic probe can accurately and quickly test logic circuits.
- Supply: 3-18 VDC
- High frequency response, with LED light indicating logic level and pulse.
- Instant indication and pulse memory function.
- Used for DTL, TTL and CMOS.
- Suitable for laboratories, circuit testing, troubleshooting, school teaching, industry, etc.
LSP-A100 SPOT WELDING MACHINE
- Brand – Lithium Spot
- Type – Lithium Spot Pro
- Model – LSP-A100
- Rated Input Power – 220V AC 2KV
- Usage/Application – Lithium Battery Spot Welding Machine
- Model Name/Number – LSP-A100
Load more products
Loading...