Showing 349–360 of 4090 results
Shop
24V 500W Mid drive Brushed Motor
- Voltage: 24 Volt
- No Load RPM: 3000
- No Load Current: <2.8 Amps
- Rated Wattage: 500W (0.67 Horsepower)
- Rated Load RPM: 2650
- 500 RPM output from gearbox
- Torque (Nm): 8.5
- Rated Current: 26.7 Amps
- Efficiency: 78%
- Reduction Ratio: 6.67:1
- Direct Drive (No Free Spooling)
- Suitable for Forward and Reverse Operation
- Base Mount Model
- 12 Gauge Power wire
- 11 Tooth Sprocket Suits #40 and #420 Chain
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
24V 8 Channel Relay Module
- Power and trigger voltage are connected via the header connector.
- Each channel has an LED that shows the relay status.
- For simple relay output and aux power connection, use a screw terminal connector.
24V Cold White 5050 SMD LED Strip-1Meter
- Colour of LED Glow: Cold White
- Length of Strip: One Metre
- Working Voltage: 24 volts
- LED count: 60 LEDs per metre
- IP20 protection (not waterproof)
24V DC Mini Solenoid Valve for Water Air Gas – Normally Closed
- Operating Voltage: 24V DC
- Current Consumption: 110mA
- Pressure: ≤200mmhg
- Import Aperture: 2.2mm;
- Export Aperture: 2mm
- Weight: about 55 g
24V headlight with horn and battery indication
- Voltage: 24VDC
- Light Type : LED
- Horn
- Battery indication
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter
- Working voltage: DC 9V–36V
- Output voltage: 5.2V/5A/25W
- 9~24V input: Output 5.2V/6A/30W
- 24~32V input: output 5.2V/5A/25W
- 32~36V input: output 5.2V/3.5A/18W
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
24V/36V/48V EBike Twist Throttle Grip Accelerator for E-bike
- Type: Twist Throttle
- The inner diameter of handle: 23 mm.
- Inner Total length: 120 mm.
- Weight: 210 gm.
- Length of Wire: 1.56 m.
- Wire: Red – Supply, Black – GND, Green – Signal.
24V/36V/48V SINGLE SIDE BATTERY INDICATOR WITH ON/OFF SWITCH THROTTLE
The EV 24V/36V/48V single side battery indicator with on/off switch throttle is a compact and versatile component designed for electric vehicles. It combines a battery indicator, displaying real-time battery charge levels, with a throttle featuring an on/off switch for motor control. This integration offers riders convenient monitoring of battery status and seamless motor engagement, enhancing both user experience and energy efficiency.
250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module
- Create a DIY stabilised power supply with an adjustable output between 12 and 50 volts. An input of 12 volts is OK.
- Provide electricity to your electronic devices; the output voltage can be adjusted to match the voltage of your system.
- The power source in your car may power your laptop, PDA, and other electronic devices.
- A powerful laptop transportable power source With a large-capacity 12V lithium battery pack, a DIY solar panel voltage regulator is used.
- Charger for lithium-ion batteries, storage batteries, etc.
- Run powerful LED lights.
25GA-370 12V/280 RPM DC Gear Motor
- It is built with strength
- Long-lasting metal bushes are outfitted
- Low Noise Shaft
- Metal Gears for Optimal Efficiency
- It has high-quality gears included
- High torque with incredibly little current usage
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
Ceramic antenna cable is the product.
1575.42 MHz ± 4 MHz is the frequency.
Gain of the antenna: 28dB
Range of operation: -45 to +85
Polarisation: circular polarisation in the right hand
Weight: 15g; Interference suppression: 30dB ± 100MHz
26 Teeth Universal Stainless Steel Extrusion Gear for 3D Printer
- 5 mm in diameter inside
- Length of Gear Toothed: 7 mm
- 11 mm in outer diameter
- Dimensions (L x W): 11 × 11 mm
- There are 26 teeth in all.
Load more products
Loading...