Showing 3673–3684 of 4062 results
Shop
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
- Transmitter 600mW/48CH >1km in an open space.
- Frequency control: phase lock loop with built-in frequency
- Female RP-SMA connector for the transmitter module.
- The antenna connector is RP-SMA male.
- Supply Voltage: 7–24 V; 220 mA at the current.
- With 48 CH, all FPV 5.8g receivers are compatible.
TS835 Fpv 5.8G 600Mw 48Ch (2-6S) Wireless Av Transmitter
- 48 channels in total
- Gain of Antenna: 2dB
- 8 GHz in frequency
- Video Format: PAL/NTSC All FPV 5.8g receivers are compatible with Auto 48 CH.
- 8G 40 Channels AV Wireless FPV Transmitter with 600mW Power
- Wireless transmitter power of 600mW with a very tiny 200mA current.
- In an open region, 600mW of transmitter power ensures a 5KM range.
Tsuyo E rickshaw Motor (1000W 48V)
- MADE IN INDIA Motor
- European Technology
- Customised for India
- Light & Compact Motors
- With High Torque and Higher Efficiency
- 1.0 kW Electric Motor for E Rickshaw
- Very good build quality
- High efficiency
- Best for e rickshaw
- Strong Magnet BLDC Motor
- Water Proof Motor
- Pure Copper Winding
- High efficiency
Tsuyo E Rickshaw Motor (1000W 60V)
- Nominal Power 1.0kW
- Voltage 60V
- RPM 3000, Torque 24Nm
- High efficiency (upto 89.9%)
- Ambient temperature -30 to 50 deg Celsius, 3 phase 8 pole
Tsuyo E Rickshaw Motor (1200W 48V)
- MADE IN INDIA Motor
- European Technology
- Customised for India
- Light & Compact Motors
- With High Torque and Higher Efficiency
- 1.2kW Electric Motor for E Rickshaw
- Very good build quality
- High efficiency
- Best for e rickshaw
- Strong Magnet BLDC Motor
- Water Proof Motor
- Pure Copper Winding
- High efficiency
Tsuyo E Rickshaw Motor (1500W 48V/60V)
- Nominal Power 1500W, Peak Power : 4.4kW
- Voltage 60V
- RPM 3300, Peak Torque 45Nm
- High efficiency (upto 94%)
- Ambient temperature -30 to 50 deg Celsius, 3 phase 8 poles
TTGO ESP32 WiFi and Bluetooth Development Board with 1.14″ LCD Display
- Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor
- Operating Voltage: 2.7V – 4.2V
- Working Current: 60mA
- Battery Charging Current: 500mA
TTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
-
Power Supply: Input USB 5V/1A
-
Charging current :500mA
-
Battery Input: 3.7-4.2V
- It also has a digital RSSI function, RF wake-up function,
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup
TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
- Type of USB connector: USB-Mini Chip Utilised: FT232RL Indicator LEDs with 5v and 3.3v output voltages USB Port
- Up to 1 Mbps of data transfer speed detection done automatically
- Ability to exchange data via an external port using the UART protocol
- Supports Linux, Mac OS X, Windows CE 4.2–5.2, Windows CE 6.0, Windows 8, Windows 7, Windows Vista, Windows XP, and more.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
TTM-20RPM Straight Type Dual Side 6V BO Motor
- Make: BO Motor
- Speed: 20 RPM
- 6 V
TTP223 Touch Key Module – 2Pcs
- Voltage range for input: 2 to 5.5 volts DC.
- At VDD=3V, the response time maximum is around 60 mS in rapid mode and 220 mS in low power mode.
- Capacitance (0~50pF) can be used to vary sensitivity.
- Stable human body touch detection to replace conventional direct switch keys.
- offers a pad option for direct mode toggling mode (TOG pin).
- Following a 0.5-second steady period following power-on, the function is disabled and you should not touch the keypad during that time.
- When the key is not touched, the auto calibration and recalibration phase lasts for roughly 4.0 seconds.
Load more products
Loading...