Showing 3937–3948 of 4062 results
Shop
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
- supports the MPPT (Maximum Power Point Tracking) feature, which increases the solar panel’s efficiency.
- Adaptable battery recharge via USB Type-C power adapter and solar panel
- Compatible with screw terminal or DC-002 jack input, 6V–24V solar panels
- Stylishly finished, heavy-duty aluminium body with several status LEDs
- By taking off the lid, replacing the batteries is simple.
Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band
- SX1262 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Waveshare SX1262 LoRa HAT for Raspberry Pi 915MHz Frequency Band
- SX1262 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band
- SX1268 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 410.125 ~ 493.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
- Voltage supply: 3.3 V to 5 V
- TSL25911FN is the system.
- Interface for communication: I2C
- Fixed interface address 0x29
- Range of measurement: 0 lx to 88000 lx
- Sensitivity: 188 ulx at maximum
- 600M:1 dynamics
- The gadget works with STM32, Arduino, and Raspberry Pi.
Waveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi 3x USB 1x Gigabit ETH Driver-Free
- Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android
- Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well
- Comes with development resources and manual
Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector
- Resolutions up to 4K for HDMI Ethernet Channel
- Audio Return Channel
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare USB HUB HAT (B) for Raspberry Pi Series with 4x USB 2.0 Ports
- Operating Voltage:5 V
- USB port:4
- Maximum Clock frequency:12 MHz
- Dimension:65x30x15 mm
Waveshare USB Port High Definition HDMI Video Capture Card, for Gaming / Streaming / Cameras HDMI to USB 3.0 Version
Integrated USB 3.0 gadget
In line with USB 2.0 device mode
USB video supports MJPEG and YUV422 and conforms with UVC 1.0 protocol.
Waveshare USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection
- Baud Rate: FT232RNL 300bps ~ 3Mbps
- Device Port: RS485/422
- Host Port: USB Operating voltage: 5V
Waveshare USB to Serial Port Expansion Board HUB
- 4 USB Ports, Compatible with USB2.0/1.1
- Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
Waveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
- Host Interface: USB
- Devise interface: UART
- Communication Range: 50bps ~ 6Mbps
- USB Device connector: USB Type-A;
- Protection: self-recovery fuse, ESD protection
- UART interface connector: 6pin right-angle pinheader; 3pin connector
- protection: IO protection diode
Load more products
Loading...