Showing 397–408 of 2380 results
Shop
75cm Diameter Fast-fold Landing Pad/ Helipad for RC Drone
Superior Quality Waterproof Nylon Material.
Extremely accurate printing.
Sun protection, waterproof, Colour fading is difficult.
Dual-sided, dual-colored pattern.
Draw attention to the Helipad’s position using an illuminating Specialty Carrying bag.
788BS 8×8 1.9mm Red LED Dot Matrix Display CA
- Easy to Install on Breadboard
- Bright LED lights
- Compact Design.
- LED Size: 1.9mm
- Configuration: Common Anode
7mm 3 in 1 HD Android Mobile Phone Endoscope Camera with 1M Length Waterproof IP67 6 LEDs USB Inspection
- Cable Length:1m
- Lens Diameter:7mm
- Resolution:7mm:640 * 480
- Camera Light Source:6 Adjustable LEDs
- Frames Per Second:30fps
- Viewing Angle:70°
- Waterproof Level: IP67
7Semi SCD41 High Accuracy CO2, Temperature and Humidity Sensor Breakout I2C
SCD41 Specifications
- Photoacoustic CO2 sensor technology
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 5000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
- Board Dimensions: 20mm x 20mm
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
- 2-AMP solid state relay board with 8 channels.
- Manage up to 8 loads at a maximum of 2 amps each at 120 or 240 VAC.
- Excellent for holiday displays, lights, etc.
- Using eight solid-state relays, 100 to 240 VAC, 2A.(Hz 50/60).
- Energy source: 5 V DC (160 mA)
- Current Trigger: 2 mA
- Voltage of Trigger: 3.3V–5V
8 Channel Bi-Directional Logic Level Converter Module
- Composition: Metal and plastic
- Channel Count: Eight
- Weight: 2g
- Input Voltage (V): 3.3 to 5
8 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
- Eight channels are available.
- Operating Voltage of Relay: 5V
- One contact that is typically closed and one that is generally open
- Relay coil increase and triode drive
- Pin of a high impedance controller
- Pull-down circuit to prevent malfunctioning
- Lamps for the control and power supply indicators
- Instructions for the power supply and relay are illuminated, and the disconnect is off
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
8 in1 Throttle Calibration Hub for RC Multirotor ESC Speed Controller
Send a throttle signal to as many as eight ESCs.
Adjust the throttle range to suit up to eight ESCs.
Ten grams in weight.
Ten centimetres is the length of the cable.
8 Pin 2.54mm Pitch Pluggable Screw Terminal Block
- The compact shape saves space.
- Tightening screw with tension sleeve
- A low-temperature rise connection is guaranteed by maximum contact force in compliance with EN-VDE Standard
8 Pin DIP IC Socket Base Adaptor (Pack of 10)
- 8 pins.
- JDEC compliant.
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
8 Way Slide Switch 2.54mm Pitch (Pack of 3)
- 8 way switch
- Pitch – 2.54mm
- DIP Slide Switch
8*10mm 10uH DIP Power Inductor (Pack of 5)
tiny in size.
elevated Q factor.
high frequency of self-resonance.
Minimal leakage of magnetic flux.
magnetically protected.
RoHS free.
Load more products
Loading...