Showing 493–504 of 2389 results
Ai Thinker LoRa-Ra-01 RF Transceiver Module
Original price was: ₹599.00.₹469.00Current price is: ₹469.00.- Automated Meter Reading.
- Home and Building Automation.
- Wireless Alarm and Security Systems.
- Industrial Monitoring and Control.
- Long-range Irrigation Systems.
Ai Thinker NF-01-N Wireless Transceiver Module
Original price was: ₹349.00.₹279.00Current price is: ₹279.00.- DIP-8 ultra-small package
- built-in 2.4G antenna, compact size, easy to use
- Supports 2Mbps/1Mbps/250Kbps data rate
- Supports six channels of data reception
- modulation methods: GFSK/FSK
Ai Thinker NF-01-S Wireless Transceiver Module
Original price was: ₹199.00.₹139.00Current price is: ₹139.00.- DIP-8 ultra-small package
- Main Chip: Si24r1
- Built-in 2.4G antenna, small size, easy to use
- Supports data reception for six channels
- Modulation method: GFSK / FSK
- Supports 2Mbps / 1Mbps / 250Kbps data rate
Ai Thinker NF-03 Wireless Transceiver Module
Original price was: ₹210.00.₹170.00Current price is: ₹170.00.Built-in 2.4G antenna, compact size, easy to use
2. Support data reception of six channels
3. Modulation method: GFSK / FSK
4. Support 2Mbps/1Mbps/250Kbps data rate
5. Internally integrated high PSRR LDO
6. Wide power supply voltage range: 1.9~3.6V
7. Average emission current as low as 110mA
8. Receiving sensitivity: <-83dBm @ 2MHz
9. Maximum transmit power: +7dBm
10. With four-wire SPI interface, the speed can up to 10MHz
Ai Thinker NodeMCU-32S-ESP32 Development Board
Original price was: ₹940.00.₹810.00Current price is: ₹810.00.- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Ai Thinker TB-04 Bluetooth module
Original price was: ₹354.00.₹278.00Current price is: ₹278.00.- 1.1mm spacing SMD-20 package
- 6 PWM output
- Antenna patch pad, reserved antenna hole can be directly inserted spring antenna
- Brightness (duty cycle) adjustment range 5-100%
- Factory default warm and cool color duty cycle 50% each
- PMW output frequency 1 KHz
- With small night light function
- With wall switch switching color temperature function
Ai-Thinker Ca-01 4G Cat.1 LTE Module
Original price was: ₹1,650.00.₹1,395.00Current price is: ₹1,395.00.- Module: Ca01
- Communication standard: 4G
- Applicable frequency band: LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41
- General characteristics: 3GPP E-UTRA Release 13
- bandwidth:1.4/3/5/10/15/20MHz
- Normal working temperature: -35 ° C ~ + 70 ° C
Ai-Thinker EC-01G NB-IOT Module
Original price was: ₹897.00.₹759.00Current price is: ₹759.00.- Processor: Cortex-M3，support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14（2.54Spacing standard row needle)
- Size: 19.2*18.8*2.8(±0.2)MM
Ai-Thinker PB-03 BLE 5.2 Module
Original price was: ₹569.00.₹499.00Current price is: ₹499.00.- 1.1 mm spacing SMD-20 package
- 6 channels PWM output
- The antenna adopts half-hole pad mode, which can lead to the main board.
- With the reservation of antenna holes, for inserted the spring antenna directly
- Brightness (duty cycle) adjustment range 5%-100%
- Factory default cool and warm color 50%
- PWM output frequency 1KHz
- Features with Nightlight
- Switching Color Temperature with Wall Switch
Ai-Thinker TG-12F Wi-Fi + BLE 5.0 Module
Original price was: ₹340.00.₹229.00Current price is: ₹229.00.- Model ESP32-C3F/ ESP-C3-12F
- Package/Case SMD22
- Data Rate: up to 150Mbps
- Supply voltage: 3.6V
- Current: >500mA
Alarm Finder Tracer Buzzer for RC Lost Aircraft
Original price was: ₹345.00.₹223.00Current price is: ₹223.00.4–6 V is the operating voltage.
Drain Current: 1 to 35 mA.
4.5 grams in weight.
When you lose contact with your remote control aircraft, let you know where it is.
Very helpful when the multirotor loses control.
Installing the alarm is simple; just link it between the servo and the receiver.
