Showing 601–612 of 4075 results
Shop
55 mm Blade Propeller Prop with 8520 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 39000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
55 MM Propeller for Micro Quadcopters
- Material: Plastic.
- Total Length: 55 mm.
- Propeller diameter (ID): 1 mm.
-
Color:Â Black.
- Durable plastic construction
- Strong and lightweight
550 Diaphragm Pump 12V Water Pump for Water Spray Fish Tank Reflux Pump
- Watering setup: essentially the same, but more sprinklers and timers are needed
- The price of the 12V DC reflux diaphragm pump 550 is the pump itself; no further accessories are included.
- 0.48MP is the maximum pressure.
- 12V of voltage and at least 2A of current—a recorded 1A is insufficient to bring
- Suction: about three metres, ideally two metres (a vertical height of 1.5 metres will not cause any issues).
- Head: four to five metres (not shot)
- 55° is the highest temperature resistance.
- 3.5 litres per minute of flow
55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter
Fibreglass is the material.
55 mm in total length.
Diameter (ID) of propeller: 2.9 mm.
Red and Black in colour.
robust plastic design
robust and light-weight
55mm Aluminum Heatsink with Cooling Fan for Graphic Cards
- Composition: Aluminium Sheet
- Copper in colour
- Screw spacing: 5.5 cm
- The dimensions are 55 x 55 x 12 with a 2 pin interface (2 lines). interface for graphics
- Working Voltage: 12 volts
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
55mm Blade Propeller+720 CW & CCW Brushed Motor For Indoor Racing Drone
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 55mm
57HS51-1006B NEMA23 7.2 kg-cm Hybrid Stepper Motor – Round Type – Dual Shaft
- Step Angle: 1.8 °
- 1 A/Phase Current
- Holding Torque: 72 N-cm
- Maximum detent torque of 3.6 N.cm
- Lead Wires: 6
- Shaft Diameter (both sides): 6.35 mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
57HS76-2804-05 NEMA23 18.9 kg-cm Hybrid Stepper Motor – D-Type Shaft
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm
5800B Light Dependent Resistor (LDR) White Color
- Above 200 MΩ of dark resistance
- White in Colour
- 4 KΩ of light resistance
- Measurement in diameter: 5mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
58mm Plastic Omni Wheel
- Diameter: 58mm
- Roller Diameter: 13mm
- Body Material: Nylon
- Roller Material: Nylon+PE
- Load capacity: 3KG
- Net weight:60g
5A 12V Overcurrent Protection – AC Current Detection Sensor Module
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
5A 3 Pin SPDT Toggle Switch
- Single Pole Double Throw.
- Main Body: 12 x 7 x 10mm.
- Lever Length: 10mm.
Load more products
Loading...







Motors