Showing 817–828 of 4090 results
Shop
Acrylic Case for Raspberry PI 4 Model B with Cooling Fan Slot
- 6-piece Acrylic case with access to all Ports on pi 4
- Compatible for All variant of the Raspberry pi 4 Model B
- Slot for Cooling Fan
- Easy to assemble without any Screws or Nut-Bolts
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back.
Acrylic Case For XH-W1209 Temperature Control Module
- Excellent Quality
- Crystal Clear
- Weight: 25 grams
- Dimensions: 59 x 51 x 3 (LxWxH) mm.
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
AD623 High Accuracy Programmable Gain Digital DC Instrument Amplifier Board Module
- Easy to use
- Rail-to-rail output swing
- Input voltage range extends 150 mV below ground
- Low power, 550 A maximum supply current
- Gain set with one external resistor
- Excellent dynamic specification
- High accuracy dc performance
AD7705 Dual 16 Bit ADC Data Acquisition Module – SPI Interface
- Chipset: AT24C256
- Maximum Operating Voltage: 6.25V
- Output Current: 5mA
- Operating Temperature: -55 ~ +125 °C
- Storage temperature: -65 ~ +150 °C
- Size: 37mm*12mm*12mm (L*W*H)
AD8232 ECG Monitor Sensor Module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 5 mm Jack for Biomedical Pad Connection.
Adafruit 3.5″ TFT 320 x 480 with Capacitive Touch Breakout Board – EYESPI
- Type of display: LCD TFT
- Dimensions: 3.5 inches
- Resolution: 480×320
- Type of Touch: Capacitive
Adafruit Accessories Electric Heating Pad – 14cm x 5cm
Features:
- Easy to Use
- Best Product for DIY-bio projects
- Power Source: 1.Computer USB Slot 2. Power Bank 3. AC to DC Adopter
- Color as per Image
- Wire Length: 6(mm)
- Size: 13 cm x 5 cm
- Brand – Adafruit
- Quantity: 1
Packages Includes:
1 x Adafruit Accessories Electric Heating Pad – 13cm x 5cm
Adafruit AS7341 10-Channel Light / Color Sensor Breakout – STEMMA QT/Qwiic
- Super MUX (SMUX)
- 3mm x 2mm footprint
- 16-bit ADC with digital access
- 11 readable individual sensor elements
- 10 visible channels: 415, 445, 480, 515, 555, 590 FO R BULK B2B ENQUIRIES MAIL US @ibots.in
Adafruit Circuit Playground Bluefruit – Bluetooth Low Energy
Features:
- 1 x nRF52840 Cortex M4 processor with Bluetooth Low Energy support
- 10 x mini NeoPixels, each one can display any color
- 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection and free-fall detection)
- 1 x Temperature sensor (thermistor)
- 1 x Light sensor (phototransistor) (can also act as a color sensor and pulse sensor)
- 1 x Sound sensor (MEMS microphone)
- 1 x Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer)
- 2 x Push buttons, labeled A and B
- 1 x Slide switch
- 8 x alligator-clip friendly input/output pins
- Includes I2C, UART, 6 pins that can do analog inputs and multiple PWM outputs
- Green “ON” LED, so the user knows it is powered
- Red “#13” LED for basic blinking
- Reset button
- 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries
- MicroUSB port for programming and debugging
- The USB port can act like serial port, keyboard, mouse, joystick or MIDI
Package Includes:
1 x Adafruit Circuit Playground Bluefruit
Adafruit Circuit Playground Classic
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Load more products
Loading...