Showing 1021–1032 of 2404 results
Shop
Flexible coupling OD:25mm x L:32mm Bore:8x8mm (ZRB-25×32)
- Aluminium is the material.
- Peak Velocity: 20,000 RPM
- Torque Rated: 1.5 N-m
- Bore Diameter (d1): 8 mm.
- D2: Bore Diameter: 8 mm.
FlexiForce A301-25 Force Sensor
- Thickness:0.203 mm
- Length:25.4 mm
- Standard Force: 111 N
- Width :14 mm
- Sensing Area diameter:9.53 mm FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Flip32 OMNIBUS F4 Flight Controller
- 128Mb Flash(16M Byte)
- SBUS/PPM input (Pinheaders)
- DSM/DSM2/DSMX input(Plug)
- 6PWM output (Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- All through hole pin header Design -no Sh connectors
- STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
- Works Perfect with Raceflight or BetaFlight 3.0
FLORA – Wearable electronic platform: Arduino-compatible – v3
- FLORA is fabric-friendly and beginner-friendly.
- 4 indicator LEDs and an RGB NeoPixel for even more colorful lighting.
- Easily drive 50 pixels directly from the onboard power supply or up to 500 pixels with a 5V supply.
- Can power common 3.3v modules and sensors.
- Perfect for beginners.
FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
- Model:FS-iA6B
- Operating Voltage (VDC):4.0 ~ 8.4V
- No. of Channels:6
- No. of Band:140
- Encoding: GFSK.
- RF Range:2.4055–2.475 GHz.
- Rx Sensitivity (dBm):-105
- Antenna Length (mm):26
- Video Format Supported:NTSC/PAL
FlySky CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).
FlySky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
- Data Line Cable Access for FS-i6 FS-T6 T6 i6 Transmitter
- Length: 1.5m / 4-29/32 ft
- This wire cannot be used for a simulator.
FlySky FS-GR3E 2.4G 3CH Receiver
- Reliable, interference-free 2.4GHz AFHDS signal operation
- This 3CH receiver is very easy to bind, very fast link-up, strong signal distance
- Quick and extremely stable in performance
- 3 channels for RC models such as cars, trucks, buggy, boats
- Suitable for GT3B/GT2/GT3C transmitter
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
- Bandwidth (KHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
₹7,822.22 (Incl. GST)- Transmitter: FS-i6X (6 Channels)
- Receiver: FS-iA10B (10 Channels)
- RF Range: 2.408-2.475 GHz
- RF Power : < 20 dBm
- RF Channel: 135
- Bandwidth: 500 kHz
- Total Weight: 392 gm
- Power: 6V DC 1.5A
FlySky FS-IA10B Radio Receiver
- No. of Channels: 10
- Model Type: Fixed-Wing/Glider/Helicopter
- RF Range: 2.4055-2.475GHz
- RF Channel: 140
- RF Receiver Sensitivity: -105dBm
- Bandwidth: 500KHz
- 2.4GHz System: AFHDS 2A
- Modulation Type: GFSK
- Oprating Voltage: 4.0-6.5V DC
FlySky FS-T6 6CH Transmitter with FS-R6B Receiver
- No. of Channels:6
- Model type:Glider/Heli/Airlane
- RF range(Hz):2.4000-2.485
- Bandwidth (kHz):500
- Band:160
- RF Power: Less Than 20 dBm
- Sensitivity (dBm):1024
- Battery Slot: 8 x AA battery
- Low Voltage Alarm: Yes (less than 9V)
- DSC port:Yes(PS2; output: PPM)
Load more products
Loading...