Showing 1069–1080 of 2389 results
Shop
Green A4988 driver Stepper Motor Driver- Normal Quality
- Voltage of supply: 8–35 VDC.
- 1.0A of current (no heatsink).
- 2.0A of current (heat-sink included).
- Input logic: 3 to 5.5V.
- Automatic detection and selection of current decay modes.
- Combined with a mode of slow current decay.
Green DS-430 2PIN ON-OFF Self-Reset Square Push Button Switch(NO Press Break)
- Self-securing/Secure Reset oneself
- High electrical conductivity
- This is a push-button switch of the momentary type
- Simple to operate Lightweight
GREEN NUMBER PLATE FOR EV (FRONT&BACK)
The purpose of green number plates is often to promote awareness of electric vehicles, incentivize their adoption, and facilitate access to certain benefits or privileges such as special parking spaces, access to low-emission zones, or eligibility for incentives like reduced tolls or registration fees.
Green SN04-N NPN DC10-30V Inductive Proximity Sensor Switch
Specifications:
- Model: SN04-P
- Operating Voltage(V): 10 ~30
- Current Consumption Max: 5 mA
- Detection distance(mm): 5 mm.
- Cable Length: 150 cm.
- Response Frequency: 500Hz Max.
- Protection class: IP 67
GSM 2400 – 2483 MHz 3dBi Magnetic Mount Antenna
- Frequency range – 2400MHz- 2500MHz,
- V.S.W.R < 2.0
- Gain – dBi 3.0
- Polarization – Vertical
- Maximum Input Power- 10W
- HPBW – H: 3600; V: 400
GSM 4G/3G/2G 6/7 dBi Dual Band LTE Flexible Magnetic Mount Antenna
- Frequency (MHz) :698 – 960 MHz & 1710 – 2690 MHz
- Gain: 6/ 7 dBi (with 1m cable)
- Connector: SMA- Male
- Impedance (Ω) :50
- VSWR: < 2.5
GSM Antenna SMA 5cm 900M 1800mhz
- Product: GSM Antenna
- Color: Black
- SMA male straight 5cm 900-1800MHz radio antenna.
- Frequency: 900MHz – 1800MHz
- Maximum Power: 50W
- Length: 5cm/1.97 inch
GSM SIM800C Modem with Antenna
- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32
GT2 Aluminum Pulley (Without 20 teeth) 5mm Bore for 6mm Belt – 2Pcs
- Aluminium is the material.
- 18 mm is the outside diameter.
- Diameter inside: 5 mm.
- 8.5 mm in length.
- 6 grammes in weight.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2 Close-Loop 158mm Long & 6mm-Width Rubber Timing Belt for 3D Printer
- Pitch: 2 mm
- Width: 6mm; Material: Neoprene Rubber with Fibreglass Core
- Length overall: 158 mm
- Height of belt: 1.52 mm
- Height of tooth: 0.76 mm
- Form: Condensed Loop
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
- Pitch: 2 mm
- Width: 6mm; Material: Neoprene Rubber with Fibreglass Core
- 400 mm in total length
- Height of belt: 1.52 mm
- Height of tooth: 0.76 mm
- Form: Enclosed Ring
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GT2-6mm Belt Width 36 Teeth 8mm Bore Timing Pulley
- 8 mm is the inner diameter.
- Superior Grade Aluminium
- Outstandingly Worked
- Robust and useful
- Reduces the possibility of the belt slipping
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...