Showing 1273–1284 of 2373 results
Shop
LCD2004 Parallel LCD Display with IIC/I2C Interface
- LCD2004 is the model.
- Interface: I2C Address for the interface: 0x27
- Personality White in colour
- Backlight: bluish
- 5V is the supply voltage.
- Size (L x W x H) in millimetres: 98 x 60 x 14
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
LCUS-1 5V USB PLC SERIAL CONTROL RELAY MODULE
1.On board high-performance micro-controller chips.
2.On board CH340 USB control chip.
3.On board LED power lights and relay status LED lights.
4.On board 5 v,10 A / 250 VAC,10 A / 30 VDC relays,relay’s long life can absorb 100000 times in a row.
5.Module with over-current protection and relay diode current protection function.
6.PCB size: 49.6 (mm) x16 (mm).
LD Robot D100 Triangulation Lidar
- Provides an excellent light-sensitive CCD
- Slim, condensed, and fashionable appearance
- Offers scanning with a 360-degree laser
- Range of the distance measure: 0.15 to 8 m
- Scanning frequency: 6 Hz
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
LDRobot DTOF Laser Ranging Sensor, 360° Omni-Directional Lidar, UART Bus
- Typical range of measurement: 0.02–12 m
- Frequency of sampling: 4500 Hz
- Frequency of sweep: 10 Hz
- Resolution of angles: ≤1°
Leadshine DM542 Digital Stepper Motor Driver
- Excellent performance at high speeds
- Voltage supply up to +50VDC
- Maximum output current of 4.2 A
- Frequency of pulses up to 300 KHz
- Reduce idle current automatically
- Three-state technology for current control
- Self-calibration technologies
- Technology for pure-sinusoidal current regulation
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
LED Connector 3pin 10mm (Pack of 2)
- LED Connector 3pin 10mm L Shape.
- The connectors of this wire are for strips which PCB board width is 10mm
- Suitable for RGB / RGBW / RGBWW color 5050 LED strips
LED Connector 3pin 10mm (T Shape) ( Pack of 2)
- Shape: T type
- No. of Pins: 3
- Production Process: cold pressing
- Product Material: high-temperature silicone
- Interface Type: flat
- Working Temperature: -40℃ to 70℃
LED Display 48V-72V speedoMeter for EVehicle
- SIZE: 155*82.55MM
- WIRE LENGHT: 25cm
- COLOR: BLACK
- MATERIAL: Plastic
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
LED Night light For FPV Indoor and Outdoor Racing Drones
Long lifespan, low power usage, and extreme brightness
Material: LED light with aluminium alloy
Shade: Blue
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
- PCB Dimensions: LxWxH = 60 x 20 x 13.5 mm.
- Red, yellow, and green in colour
- LED Dimensions: 10 x 7.
- Lightness: Standard lightness.
- 5 volts is the voltage.
- Common cathode red, yellow, green control is the interface.
Left Side MK8 extruder Aluminum 3D Printer Block
- High-quality replacement left side MK8 extruder for clogged or damaged MK8 extruder
- Available in three varieties to accommodate the use of two extruders.
- Composition: Alloy of aluminium
- 60 grammes in weight
Lemon 1000mAh 3S 25C/50C Lithium Polymer Battery Pack
- Guaranteed leak-free performance in all orientations, excluding upside-down
- Two to three years is the anticipated lifespan for float service applications.
- Functioning in a wide range of outside temperatures
- Capacity for recovery even following profound discharges
- Little in size, easy to install, and minimal maintenance
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...