Showing 181–192 of 511 results
Shop
CC1101 868MHZ Wireless Transceiver Module
- Support FSK, GFSK, ASK / OOK and MSK
- Configurable data rate: 1.2k to 500kps
- Vertical Pin header (1.27mm pitch)
- Low voltage input (1.9~3.6V)
- SPI interface
- Independent 64-byte RX and TX data FIFOsCC1101 Core, 433MHz Wireless function
CD54 470μH Surface Mount Power Inductor (470 microH) 5pcs
- Level of Sensitivity to Moisture: 1
- Available without halogen.
- 20 is the tolerance percentage.
- Temperature range for operation: -40°C to +100°C (including coil’s self-temperature rise)
- Temperature range for storage: -40°C to +100°C
- Temperature of solder reflow peak: 260 °C.
Ceramic capacitor Assorted Kit- 30 Kinds from 2PF-0.1UF
Good Quality Capacitor
30 values with 10pcs for each value
CH340G SOIC16 USB to Serial TTL-RS232 converter IC
- Compliant with USB Specification Version 2.0, this device interface operates at full speed and requires only an external crystal and capacitance.
- Replace the outdated peripheral device with an emulator of a normal serial interface, or add more serial.
- interface via a USB cable.
- Completely compatible with a computer endpoint running Windows as the serial application programme.
- With a configured transceiver buffer and a hardware full duplex serial interface, it can enable communication at baud rates ranging from 50bps to 2Mbps.
- Supports RTS, DTR, DCD, RI, DSR, and CTS, common MODEM liaison signals.
- By including level converter hardware to provide RS485, RS422, RS232, and more interfaces.
- Supports baud rates ranging from 2400bps to 115200bps and IrDA criterion SIR infrared communication.
Cligo Smart Robot Car Kit 4WD for Kids
- EasyMech’s branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
Combo of Raspberry Pi 4 Model-B with 1 GB RAM + Micro-HDMI Cable + Micro-USB to C type Converter
With this new upgrade to the Pi, you will need two more additional accessories to get it fit in your project which is micro-HDMI cable and Micro-USB to Type-C converter.
We made the combo of this essential product needful for new upgraded hardware of Raspberry Pi 4 and you can get it all in one go. So get it and Quickstart your journey with Latest Raspberry Pi 4 Model B.
CP2102 (5-Pin) USB 2.0 To TTL UART Serial Converter
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Size: 42mm X 15mm.
Weight: 4g
CP2102(6-pin) USB 2.0 to TTL UART serial converter
- Brand new and high quality
- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
Cross-Head Screw Driver for Raspberry Pi
- Type: Phillips (cross-head)
- Material: Steel
- Length: 85 mm
- Plastic Handle
- Pocket size
D 205 B Analog PIR sensor for Security Alarms and Automatic Lighting Applications
- Ceiling Lamps
- Home security systems
- Low power consumption
- Wide-angle
- Slight movement can be detectable
D203B Dual Elements Passive Infrared PIR Sensor Used for Alarm System
- Large detection angle
- Custom design is available
- Higher in cost-performance
DC 12V 4×4 16 Key Matrix Membrane Switch Keypad
- 4 x 4 Matrix Membrane Keypad
- 8 pin connector
- Adhesive mounting (sticker on the back side)
- Operation Temperature: 0 to 60 centigrade
- Humidity: 40 centigrade, 90%-95%, 240 hours
- Flexible Circuit Length: Approx. 3.3 inch / 83 mm







Motors