Showing 1993–2004 of 4073 results
Shop
GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor – Original Chip
- 3-dimensional electronic magnetic compass.
- accurate heading details.
- Working Voltage: DC 3 to 5 V.
- Chip for driver: HMC5883L.
- Message exchange: I2C protocol.
- Range of measurement: ± 1.3-8 Gauss.
GY-30 BH1750FVI Digital Light Intensity Illumination Sensor
- High precision determination accurate to 1 Lu for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module
- The regulator for the VL53L0X 3-in-1 ranging and gesture detection sensor ranges from 5 to 2.8V (output voltage: 2.8V).
- VL53L0X level shifter for signal interface
- PWM Output on Serial Port
- Accurate distance measuring that isn’t influenced by target size or reflectivity
- Breakout board that is simple to incorporate into the client’s device
- Permits a simple use case for gesture recognition.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
GY-906 MLX90614ESF -BCC Contactless Temperature Sensor Module
- 3V is the input.
- Range of sense: 4 cm to 10 cm
- 35 degrees is the field of view
- Temperature range of the sensor: -40 to +85°C
- 10k I2C pull-up resistors
GY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
- 2.3 V–5.5 V power source
- Digitally configurable output frequency range: 0 MHz to 12.5 MHz for both phase and frequency
- Resolution of 28 bits: 0.1 Hz using a reference clock of 25 MHz
- Outputs in square, triangle, and sinusoidal waves
- three-wire SPI interface
GY-9960-3.3 APDS-9960 RGB Infrared Gesture Sensor Motion Direction Recognition Module
- RGB and Gesture Sensor
- APDS-9960 sensor
- Specifications
- Model: GY-APDS9960-3.3
- chip: APDS-9960
- Power supply: 3.3v
- Communication: IIC communication protocol
- Size: 20 mm * 15.3 mm
GYML8511 Analog Output Ultra-Violet Light Sensor Module
- Operating voltage (VCC): 3 V to 5V
- Operating current: 120μA (typical) 190μA (max)
- Operating Temperature: -40°C ~ +85°C
- Photodiode sensitive to UV-A and UV-B
- Embedded operational amplifier
- Analog voltage output
- Low supply current (300uA type) and low standby current (0.1uA type)FOR BILK B2B ENQUIRIES MAIL US @ibots.in
HackRF One
- 1 MHz to 6 GHz operating frequency
- half-duplex transceiver
- up to 20 million samples per second
- 8-bit quadrature samples (8-bit I and 8-bit Q)
- compatible with GNU Radio, SDR#, and more
- software-configurable RX and TX gain and baseband filter
HALF WIRING FOR E-BIKE
Original wiring harness for e bikes. Motorcycle complete wire harness is produced with high accuracy and after strict quality control, ensuring perfect fitness. “Half wiring” for an electric bicycle (e-bike), it likely refers to a partial wiring harness used for connecting electrical components, such as the motor, battery, controller, throttle, display, and other accessories.
Hanyoung Nux M902 Roller Plunger Limit Switch
- Model: M902 Roller Plunger
- Type: Roller Plunger; Operating speed range: 0.1 – 1 ㎧
- 193g in weight
HAT DIY PCB Prototyping Board for Raspberry PI ZERO
- 164 holes of prototyping area
- 4 rows of 6 connected holes for power rails and other purposes
- Silkscreen marking for 40-pin Pi Header reference
- High-quality HASL PCB finishing
- D0.9mm drill holes and D1.9mm pad size
Havells Plastic 16A 30mA PRCD Plug Top (White)
Colour: White
Pattern Name: PRCD Plug Top
Brand :Havells
Material :Plastic
Connector Type :Plug In
Amperage :16 Amps
Load more products
Loading...