Showing 841–852 of 4073 results
Shop
Ai Thinker ESP-C3-13U WiFi + BLE Module
- Support Wi-Fi 802.11b/g/n,1T1R mode data rate up to 150Mbps.
- Support BLE5.0,and rate support:125Kbps,500Kbps,1Mbps,2Mbps.
- 32-bit RISC-V single-core processor, supports a clock frequency of up to 160MHz, with 400 KB SRAM,384 KB ROM,8KB RTC SRAM
- Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
- SMD-18 package
- Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
- Support multiple sleep modes, deep sleep electric current is less than 5uA UART rate up to 5Mbps
- Support STA/AP/STA+AP mode and mix mode
- Support Smart Config (APP)/Air Kiss (WeChat) of Android and IOS One-click network configuration
- Support UART port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be better understand
- Support secondary development, integrated Linux development environment
- ESP-C3-13U module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version
Ai Thinker ESP-C3-M1-I WiFi + BLE Module
- Support WiFi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
- Support BLE5.0, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
- ISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, has 400KB SRAM, 384 KB ROM, 8KB RTC SRAM
- Support UART/GPIO/ADC/PWM/I2C/I2S/SPI interface, temperature sensor, pulse counter
- SMD-61 Package
- Integrated WiFi MAC/BB/RF/PA/LNA/Bluetooth
- Support multiple sleep modes, deep sleep current is less than 5uA
- Serial port rate up to 5Mbps
- Support STA/AP/STA+AP mode and promiscuous mode
- Support Smart Config (APP)/Air Kiss (WeChat) for Android and IOS one-click network configuration
- Support serial port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be used quickly
- Support secondary development, integrated Windows and Linux development environment
- About Flash: ESP-C3-M1-I chip has built-in 4MByte Flash by default
Ai Thinker ESP32-A1S WiFi+BT Audio Development Board
Features:
- The smallest 802.11b/g/n WiFi BT SoC Module
- Low power 32-bit CPU, can also serve the application processor
- Built-in AC101 Codec audio decoding chip, can support playing music and recording
- Built-in 520 KB SRAM, external 4MPSRAM
- Supports UART/SPI/I2C/PWM/ADC/DAC
- Support for firmware upgrade (FOTA)
- Antenna supports on-board antenna or IPEX block output
- Supports a variety of mainstream compression and lossless audio formats, including M4A, AAC, FLAC, OGG, OPUS, MP3, WAV, etc.
- Supports audio input methods such as MIC and Line-in.
Ai Thinker ESP32-C3-01M Wi-Fi + BLE Module
- Package: DIP-18
- Size: 18 x 18 x 2.8 mm ±0.2mm
- Antenna Type: On-board PCB antenna
- Frequency Range: 2400~2483.5MHz
- Operating Temperature: -40℃~85℃
- Storage environment: -40℃~125℃,<90%RH
- Power supply
- Voltage3.0V~3.6V,Electrical current>500mA
- Interface UART/GPIO/ADC/PWM/I2C/I2S
- Bluetooth: BLE5.0
- SPI Flash: 4MByte (Default)
- Security: WEP/WPA-PSK/WPA2-PSK
Ai Thinker ESP32-S WiFi+BT SoC Module
- 802.11b/g/n Wi-Fi+BT SOC
- Dual-core 32-bit CPU, 240 MHz frequency
- Built-in two 12 bit SAR ADCs, up to 18 channels
- Supports UART/SPI/I2C/SDIO/GPIO/ADC/PWM
- SMD38 package
- Supports OpenOCD debug interface
- UART baud rate up to 4Mbps
Ai Thinker LoRa Series Ra-01S Spread Spectrum Wireless Module
- LoRa modem
- Support FSK, GFSK, MSK, GMSK, LoRa and OOK modulation methods Support frequency band 410MHz~525MHz
- Working voltage is 3.3V, maximum output is +22dBm, maximum working current is140mA
- Low power consumption characteristics in receiving state, the minimum receiving current is 4.5 mA, standby current is 1.6mA
- High sensitivity: as low as -140dBm
- Small volume dual row stamp hole patch package
- The module adopts SPI interface, half-duplex communication, with CRC, upto256-byte packet engine
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Ai Thinker LoRa Series Ra-08H Spread Spectrum Wireless Module
- Adopt SMD-18 package
- Support frequency: 803MHz ~930MHz
- Working voltage is 3.3V, theoretical maximum transmit power: +22dBm High sensitivity: -138dBm @125Kz SF12
- Support spread spectrum factor: SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
- Embedded memory, 128KB FLASH,16KB SRAM
- Support LoRa/(G)FSK/BPSK/(G)MSK modulation
- Antenna interface is compatible with stamp holes / circular holes and IPEX, etc., support more option selection
- Support multiple sleep modes: depth sleep current is low to 0.9uA
Ai Thinker LoRa-Ra-01 RF Transceiver Module
- Automated Meter Reading.
- Home and Building Automation.
- Wireless Alarm and Security Systems.
- Industrial Monitoring and Control.
- Long-range Irrigation Systems.
Ai Thinker NF-01-N Wireless Transceiver Module
- DIP-8 ultra-small package
- built-in 2.4G antenna, compact size, easy to use
- Supports 2Mbps/1Mbps/250Kbps data rate
- Supports six channels of data reception
- modulation methods: GFSK/FSK
Ai Thinker NF-01-S Wireless Transceiver Module
- DIP-8 ultra-small package
- Main Chip: Si24r1
- Built-in 2.4G antenna, small size, easy to use
- Supports data reception for six channels
- Modulation method: GFSK / FSK
- Supports 2Mbps / 1Mbps / 250Kbps data rate
Ai Thinker NF-03 Wireless Transceiver Module
Built-in 2.4G antenna, compact size, easy to use
2. Support data reception of six channels
3. Modulation method: GFSK / FSK
4. Support 2Mbps/1Mbps/250Kbps data rate
5. Internally integrated high PSRR LDO
6. Wide power supply voltage range: 1.9~3.6V
7. Average emission current as low as 110mA
8. Receiving sensitivity: <-83dBm @ 2MHz
9. Maximum transmit power: +7dBm
10. With four-wire SPI interface, the speed can up to 10MHz
Load more products
Loading...