Showing all 12 results
Programming Modules
CH340G SOIC16 USB to Serial TTL-RS232 converter IC
- Compliant with USB Specification Version 2.0, this device interface operates at full speed and requires only an external crystal and capacitance.
- Replace the outdated peripheral device with an emulator of a normal serial interface, or add more serial.
- interface via a USB cable.
- Completely compatible with a computer endpoint running Windows as the serial application programme.
- With a configured transceiver buffer and a hardware full duplex serial interface, it can enable communication at baud rates ranging from 50bps to 2Mbps.
- Supports RTS, DTR, DCD, RI, DSR, and CTS, common MODEM liaison signals.
- By including level converter hardware to provide RS485, RS422, RS232, and more interfaces.
- Supports baud rates ranging from 2400bps to 115200bps and IrDA criterion SIR infrared communication.
CP2102 (5-Pin) USB 2.0 To TTL UART Serial Converter
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Size: 42mm X 15mm.
Weight: 4g
CP2102(6-pin) USB 2.0 to TTL UART serial converter
- Brand new and high quality
- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
DS1302 Real Time Clock (RTC) Module without battery
Specifications
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
DS1302 Real Time Clock Module (with Battery)
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
- Operating temperature: 0 degree — 70 degree FOR BULK B2B ENQURIES MAIL US @ibots.in
DS3231 RTC Module Precise Real Time Clock I2C – AT24C02
Features:
- Accuracy 2 ppm from 0° C to +40° C
- Accuracy 3.5 ppm from -40° C to +85° C
- Digital Temp Sensor Output: ±3° C Accuracy
- Memory Chips: AT24C02 (2Kbit)
- Register for Aging Trim
- RST Output/Pushbutton Reset Debounce Input
- Two Time-of-Day Alarms
- Programmable Square-Wave Output Signal
- Fast 400 Khz I2C interface
IIC/I2C Serial Interface Adapter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Real Time Clock DS1307 RTC I2C Module AT24C32 with Battery
Features :
- This is the DS1307 Real Time Clock developed by one of our designers.
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC with LIR2032 battery (Battery include).
- 1Hz output pin.
- Consumes less than 500nA in battery backup mode with oscillator running
- Available in 8-pin DIP or SOIC
- Underwriters Laboratory (UL) recognized
- Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
- 56-byte non-volatile RAM for data storage
- 56 Bytes of Non-volatile memory available to the user.
- The DS1307 is accessed via the I2C protocol.
- The module comes fully assembled and pre-programmed with the current time.
Package Includes :
1 x RTC DS1307 24C32 Real-Time Clock Module
RS232 to TTL Serial Interface Module
- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- Operates up to 250 kbit FOR BULK B2B ENQUOROES MAIL US @ibots.in
RTC Module DS3231 RTC Module Precise Real Time Clock I2C AT24C32
- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS 3231 based RTC with 2032 Battery Holder. FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Tiny RTC Real Time Clock DS1307 I2C IIC
- Operating Voltage: 5V
- Two wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
USB to TTL Serial Port Board 5V/3.3V/1.8V Level Download and Record Line FT232RL Serial Port Module
- Serial Chip: FT232RL
- Voltage Levels: 5V, 3.3V, and 1.8V
- Interface: USB 2.0