Motors
Readytosky MT2204 2300KV CCW Brushless Motor
Original price was: ₹699.00.₹599.00Current price is: ₹599.00.- Product: Readytosky MT2204 2300KV CCW Brushless Motor
- Compatible for: 5 inch Propeller
- Compatible With: 2S-3S Lipo Batteries
- Maximum Current: 25 A
Sabertooth Dual 12A Motor Driver
Original price was: ₹6,459.00.₹6,260.00Current price is: ₹6,260.00.- 12A constant, 25A maximum for each channel Synchronous regenerative drive with up to 24V
- Ultrasonic frequency of switching
- Protection against overcurrent and heat
- Mode of lithium protection
- Maximum Current (A): 25 A
- Current Constant (A): 12
- Voltage required for operation (VDC): 18–24V
- Two channels in total
Sabertooth Dual 25A Motor Driver
Original price was: ₹10,299.00.₹9,999.00Current price is: ₹9,999.00.- 25A continuous, 50A peak per channel
6-30V nominal, 33.6V absolute maximum - Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
Sabertooth Dual 32A Motor Driver
Original price was: ₹10,300.00.₹10,150.00Current price is: ₹10,150.00.- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
Sabertooth Dual 60A Motor Driver
Original price was: ₹15,900.00.₹15,780.00Current price is: ₹15,780.00.- 120A peak and 60A continuous per channel
- 6–30V nominal, max. 33.6V absolute
- Consistent regenerative power
- Ultrasonic frequency of switching
- Protection against overcurrent and heat
- Mode of lithium protection
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
SmartElex 10D Smart Motor Driver (Powered by Raspberry Pi)
Original price was: ₹2,310.00.₹2,240.00Current price is: ₹2,240.00.- Onboard 5V 3A Buck Converter.
- Continuous 10A maximum current without Heatsink
- Two brushed DC motor Bidirectional control.
- Current limiting at 35A.
- PWM and direction-controlled driving of four externally powered NMOS transistors
- Type-C USB for SERIAL Mode
SmartElex 30D Smart Motor Driver (Powered by Raspberry Pi)
Original price was: ₹3,700.00.₹3,530.00Current price is: ₹3,530.00.- Supplying 30 amps continuously with peak currents up to 85 amps (2 Sec) per channel.
- Support motor voltage from 7V to 28V.
- Onboard Low Internal resistance MOSFETs are switched at 16KHz frequency.
- Overcurrent protection and indication.
- Thermal protection.
- Type-C USB for SERIAL Mode
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Original price was: ₹590.00.₹523.00Current price is: ₹523.00.
- Chip Set Driver: TB6560AHQ
- 10 to 35 volts for operation
- Voltage Nominal: 24V
- The 6N137 high-speed OptoCoupler ensures optimal heat dissipation with its huge heat sink, enabling a high speed without any step outs.
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
Original price was: ₹160.00.₹135.00Current price is: ₹135.00.- The TL-Smoother is an add-on module for 3D printer stepper motor drivers, and it can efficiently eliminate the mechanical chatter produced by 3D printer motors.
- The motor outputs on the board are additionally shielded from inductance voltages while the driver is not powered on thanks to flyback diodes.
- Smoother movement is achieved, particularly with the delta-style 3D printer I3. UM models can also be utilised, and the clipping effects of different machines will vary.
TMC2209 V1.2 driver for stepper motor
Original price was: ₹450.00.₹400.00Current price is: ₹400.00.| Operating mode | STER/DIR or UART |
|---|---|
| Power voltage (VM) | 4.75V—28V DC |
| Peak current | 2.8A |
| Current RMS | 2A |
| Max microsteps | 256 |
| Micro step setting | 2,4,8,16 (can be divided into 256) |
